Hotkey Commands for both Remote Unit and Local Unit
Before inserting the hotkey commands, it’s required to launch the leading code ( [Ctrl] + [Ctrl] or [Ctrl] + [Ctrl] + [E] ) depending on Cascade Architecture.
Hotkey Commands
Keyboard Push Button
[Alt] + [E] | N/A |
Function Descriptions
Cascading status selection * [both Units]
One beep: Enable Standard Mode
* [Remote Unit]
Two beeps: Enable Compatibility Mode, and the user at Remote Unit accessing to the KVM switch that is connecting to Local Unit.
* [Local Unit]
Two beeps: Enable Compatibility Mode, and the users at Local Unit accessing to the KVM switch that is connecting to the Local Unit.
[Alt] + [S] | N/A | Reset the Unit to the factory default |
[Esc] | N/A | Escape from hotkey mode |
|
| Mode selection in Sequence |
[T] | N/A | Switch console control between Local Computer and |
|
| Remote Computer |
|
| Local mode selection |
|
| * [Remote Unit] |
|
| Enable the user at the Remote Unit accessing to |
|
| the computer (KVM Switch) that connects to the |
[1] | N/A | Remote Unit. |
|
| * [Local Unit] |
|
| Enable the user at Local Unit exclusive accessing to |
|
| the PC (KVM Switch) that connects to Local Unit. |
|
| Disables the Remote Unit user accessing. |
Instruction Manual
10