Remote Control Functions:
1. | MENU button: |
|
| Please see menu setup section. | |
2. | FREEZE button: |
|
| Press any channel to get full screen display, and then press FREEZE to freeze the picture. | |
| Press FREEZE again to unfreeze. | |
3. | ZOOM button: |
|
| Press ZOOM button to achieve zoom in display. | |
| Press | buttons to choose zoom area. |
| Press Zoom button again to achieve zoom in display. | |
| Press | buttons to get full area display or press ZOOM to |
4. | AUTO button: |
|
| Press AUTO to get the sequential displays of channel 1, channel 2, channel 3, channel 4, | |
| and Quad respectively and proceed in cycle. Make sure that each channel is in a state of | |
| ON while setting auto sequence in the menu. | |
5. | QUAD. button: |
|
| Press QUAD button while in full screen mode display to display pictures in quad. | |
6/7. PIP button: |
| |
| Press PIP button to get PIP (picture in picture display). Channel 1 is the default for Full | |
| screen, and Channel 2 is the default for | |
8. | Separate cameras button: | |
| Press to view 2 cameras at same time | |
9. | Camera 1 button: |
|
| Press to view full screen of camera 1 | |
10.Camera 2 button:
Press to view full screen of camera 2
11.Camera 3 button:
Press to view full screen of camera 3
12.Camera 4 button:
Press to view full screen of camera 4
Menu Setup
Press MENU to setup the menu at any mode.
1. How to set the menu:
y Press MENU to enter main menu.
y Press 
buttons to move the highlight section and choose the desired section. Press OK to enter the desired section. To exit, press MENU button again.