A. System setup:
yDate / Time: Press 
to move the cursor to the
desired section wish to adjust. Press 
to adjust the section.
ySystem Format: Choose PAL / NTSC
yKey lock: To enable / disable button on the system box.
yFactory reset: To reset to factory default setting.
yTo exit, press MENU button again.
B. Display setup:
yDisplay on screen: To display title / date / time on the screen by check the box beside. To disable by
yScreen position: To adjust camera viewing area by adjusting X (horizontal) and Y (vertical). Border color: To change the color or camera's border.
To exit, press MENU button again.
C. Auto sequence:
yTo enable or disable auto sequence function. Each channel can be set to ON or OFF respectively. And the switching time can be set from 1sec to 99sec..
yTo exit, press MENU button again.
D. Camera setup:
yCamera 1: Press 
to switch desired camera.
y Title: Press | to move the cursor, |
and press | to adjust character. |
yPress 
to adjust Brightness, Contrast, Saturation, Hue and Sharpness.
yTo exit, press MENU button again.