SiPix Blink manual Troubleshooting, Problem Possible cause Solution

		TROUBLESHOOTING
Problem	Possible cause	Solution
The camera has no	The batteries are discharged.	Replace the batteries with freshly charged ones.
power.
	The batteries are inserted	Check the battery orientation.
	incorrectly.
	Is the camera connected to a	The camera’s buttons are not functional when
	computer?	connected to a PC. Disconnect the camera to take
		more pictures.
The camera won’t	Is the camera’s power on?	The camera powers off automatically after 30
take a picture.		seconds. Make sure the camera’s power is ON
		before taking a picture.
	Is the camera connected to a	The camera’s buttons are not functional when
	computer?	connected to a PC. Disconnect the camera to take
		more pictures.
The pictures are	The camera or subject was	Hold the camera steady to take pictures.
blurry.	moving when the picture was
	taken.
The picture is too	You are facing a bright light	Change the angle of the picture so that bright
light.	when taking the picture.	lights do not shine directly towards the camera
		lens.
My computer cannot	USB connection failure	Use the USB Doctor program provided by the
detect the digital		StyleCam Blink II. Insert the CD into your CD-ROM
camera		drive, go to My Computers Æ D:\ (Where “D:\” is your
		CD-ROM drive). Open the “Utilities” folder and double
		click on the USB Doctor program. Follow the on-screen
		instructions to use the program.

20