Inserting the Battery
Please follow the instructions below to insert the battery into your StyleCam Blink II digital camera:
1.Turn the camera’s power to OFF.
2.Open the battery compartment cover located on the bottom of the camera by sliding the cover off the camera.
3.Note the battery polarity inside the battery compartment, insert one new AAA alkaline battery, and then replace and close the battery compartment door by sliding it completely shut.
IMPORTANT WARNINGS:
•Do not use a rechargeable battery in the StyleCam Blink II. Using a rechargeable battery will damage your camera.
•Do not open the battery compartment when the camera is ON.
•Download the pictures prior to storing your camera. Battery power is required to maintain images in camera. Loss of image data will occur should the battery lose power.
•The StyleCam Blink II allows up to 30 seconds for changing the battery without losing images saved on the camera. We recommend that you download the images within 24 hours to avoid losing the pictures.
•Even without images in the camera, the StyleCam Blink II will slowly draw battery power. To conserve battery power, after downloading images, remove the battery from camera.
Caution: The camera will use battery power when a battery is inserted. Remove the battery from the camera after downloading pictures or when not in use.
3