Sirius Satellite Radio SIR-4150 user manual Operating Your Camera, Menu Setup menu

Operating Your Camera

Menu

SETUP menu

LENS	• DC
SHUTTER	• - - - -	• FLK
(condition and speed control)
WHITE BALANCE control	• ATW	• AWC		• MANUAL
BACKLIGHT	• OFF	• LOW		• MIDDLE
(Backlight compensation)	• HIGH
AGC (Auto Gain control)	• OFF	• NORMAL		• HIGH
SSNR	• OFF	• LOW		• MIDDLE
(Samsung super noise reduction)	• HIGH
SENS-UP (Low illuminance)	• OFF	• AUTO
	• CAMERA ID		• DAYNIGHT
SPECIAL	• MOTION DET		• PRIVACY
	• COMM ADJ		• IMAGE ADJ
	• RESET		• RETURN

EXIT

Settings

Settings can be made using the RS-485 communication.

Please refer 14 pages (RS-485 communication control) and connect to the RS- 485 control terminal(TRX+, TRX-)

1. When use SCC-3100A PELCO-D Protocol setting method

< SETUP SYSTEM MENU >

PTZ selection : PTZ SETUP2 selection 1)MODEL:PTZ ID, PELCO-D Protocol selection.

CONTROLLER selection : SERIAL selection 1. BAUD, 2. DATA, 3. STOP

BIT, 4. PARITY setting

*OSD button : Display OSD menu on the monitor or there is a sub-menu which can be selected by pressing OSD button.

*JOYSTICK : It can move menu cursor by upside, downward, the left side and the right side . Joystick do Up/Down/Right/Left button functions according to 4 directions that move.

LEFT BUTTON UP BUTTON

RIGHT BUTTON

DOWN BUTTON

OSD SETUP BUTTON

Notes

• Please set RS-485 communication setting of controller and camera equally.

COLOR CCD CAMERA 18 User’s Manual COLOR CCD CAMERA 19 User’s Manual