Operating Your Camera
5)When a name has been chosen, please select a position for the name display.
Please move the cursor onto 'POS' and then press the SETUP button.
The name will appear at the top left hand corner.
FRONT DOOR |
to Locate, then SET
Please find the position you wish to display the name by using the 4 directional buttons, and then press the SETUP button.
FRONT DOOR |
6) Please select 'END' and then press the SETUP button to complete ID input.
DAY&NIGHT (ICR TYPE) : Select from COLOR, B/W or AUTO modes. •AUTO: According to the input luminance level, IR Cut Filter is automatically
switched to the appropriate mode for daytime or
•COLOR : COLOR mode
•B/W : BW mode. Please press SETUP button to turn on or off the burst signal on BW mode.
Note
•If AGC is OFF, you can't select AUTO mode and B/W mode.
When DayNight mode is set to Auto under the condition which the strong IR light is flickering periodically, a malfunction of
MOTION DETECTION :
This product has a feature that allows you to observe movements of objects in 4 different areas on the screen, and the words 'MOTION DETECTED' appear on the screen when movement is detected; hence a single individual can conduct supervision efficiently. The camera detects an object's movement by sensing disparity of outline, and level of brightness and color.
•Please press the SETUP button.
-OFF : MOTION DETECTION mode is cancelled.
-ON : Any motion in the selected areas is observed.
•Please select the area you wish to observe from the 3 areas in AREA SEL mode.
•Please select ON mode for the chosen area.
COLOR CCD CAMERA 30 User’s Manual | COLOR CCD CAMERA 31 User’s Manual |