Detector
Rear Panel Description
The following connectors, display lights, and controls are located on the back of the cameras (pictured below).
DATA connector: for data transfer and power
•LVDS cameras:
•
EXPOSE OUT connector: BNC connector; the signal at the BNC connector will go to a TTL high level (+ 5 V) when the exposure begins; useful for synchronizing an external shutter in the illumination pathway; will not power the shutter
XFER display light: amber LED illuminates during data transfer
ON display light (LVDS camera)/PWR display light
green LED illuminates when camera is powered on
POWER switch (LVDS cameras only): standard rocker switch
EXT PWR connector
auxiliary CoolSNAP power supply
CoolSNAP LVDS Rear Panel
CoolSNAP