Auxiliary Power
Supply
Usage Requirements The auxiliary CoolSNAP power supply (shown below) provides power to your CoolSNAP camera, but is required only under certain conditions.
If your CoolSNAP camera is connected to an
The data ports on the CoolSNAP camera do not pass power. If the CoolSNAP camera is connected in a daisy chain configuration, and it is not the first device in the daisy chain, you need to use the auxiliary power supply.
If the CoolSNAP camera is connected to a PC that supplies power through the
Warning: Use the auxiliary power supply that shipped with your system ONLY. Do not use
Installation The auxiliary power supply ships with four unique wall plugs. You need to install one of the plugs on the power supply before using it. Select the correct plug for your wall socket and press it into the power supply. The supplied plugs include:
•NEMA
•BS1363/A for United Kingdom
•EN50075 for Europe
•AS/NZS
Specifications Input voltage:
Output voltage: 12 VDC
Output current (maximum): 1250 mA
Chapter 5. Basic Specifications 19