ENGLISH | PANASONIC |
|
|
PAIRING WITH PANASONIC X70 |
|
You need to pair devices when powering up CK3000 for the first time or after resetting your hands free. Subsequently, all connections between your phone and the car kit are automatically established when both devices are within a few meters range of each other. A 'beep' is heard when the connection is established.
Procedure :
Switch on your phone, turn the key in the car ignition and two indicator lights on the keypad should light up to indicate your
Access the Menu and select “Organizer", press "Select".
Go to “Connect” and press “Select”.
Enter “Bluetooth” menu.
Then enter “On/Off” menu.
Select “On” if it is not selected yet.
Get back to the “Bluetooth” menu by pressing .
Select “Discover & Pair”
When the search is finished, select “Parrot CK v…”. Press “Pair”.
The display reads, "Bluetooth passkey", enter 1234 then " OK".
LEARNING NAMES
Before assigning voice tags to names, you must activate the Voice Dialing on your phone.
Enter the menu and select “Contacts List”.
Enter “Settings” ands select “Voice Dial”.
Select “On” if it is not selected yet.
To assign a voice tag to a name, enter the menu and select “Contacts List”. Enter “Voice Dial” and press « Menu »
Select “Add”
Find the desired name and click on "Menu", then "Recall".
The following message is displayed: “Please Record Your Voice !". Press “Ok”. The phone displays “Voice Dial Recording”. Say the name. After you said the name, “Please Record Your Voice Again !” is displayed. Press “Ok” and say the name again.
If the recording succeeds, the phone displays “Voice Dial Set”. If not, the phone will ask you to say the name again.
To remove the voice tag for any name, access the menu and select “Contacts List”
Enter the “Voice Dial” menu and select the name.
Press “Menu”
By clicking "Play", you can listen to the voice tag.
By clicking "Delete", you will delete the voice tag.
16