ENGLISH
PAIRING WITH SONY ERICSSON T610, T616, T618, Z600 AND Z608
You need to pair devices when powering up CK3000 for the first time or after resetting your hands free. Subsequently, all connections between your phone and the car kit are automatically established when both devices are within a few meters range of each other. A 'beep' is heard when the connection is established.
Procedure :
IMPORTANT: Check that the lights on the red and green buttons come on and off according to the position of the ignition key. With these phones, it is necessary to deactivate the infrared link (IrDA) for the CK3000 to work. Proceed according to the following steps”
Connections, Activation IR, select “Deactivate” and validate by clicking on “ Selection”.
Your phone is on. Turn on the ignition key. Proceed with the following sequence to do the pairing
•
•
•
•
•
•
•
•
•
•
•
•
Select “ Connections”, then “Bluetooth”.
The pairing is done through “HandsFree” or “My Peripherals” Select “Handsfree”, validate by clicking on “Selection”
“Add a handsfree device?” is indicated on the display, validate with “Yes” or alternatively, Select “My Peripherals”, validate by clicking on “Selection” New Peripheral, click on “Add”
“Check if the Handsfree is in the correct mode and if you have the passkey”, OK “Searching for handsfree devices” is displayed, just wait.
The phone looks for all devices equipped with a handsfree profile. Then, “ Parrot CK v…” is displayed, validate by clicking on selection Enter 1234 as passkey, click OK.
The pairing phase comes to an end and “Parrot CK V…added to my peripherals” is displayed.
Using Phone-specific Features
To synchronize your phonebook to your CK3000, follow the steps hereafter: Connections, Accessories, Parrot Menu.
For detailed instructions, consult the user’s guide of the phone.
9