Atlas Sound specifications Example 5 Hotel Room Combining Using Two AA120Ms

Page 19

AA120M MIXER AMPLIFIER

OWNER'S MANUAL

Example 5 - Hotel Room Combining Using Two AA120Ms

This example utilizes the combining feature of the Atlas AA120M mixer amplifiers. The drawing on the following page shows the equipment connections for two hotel ballrooms, separated by a moveable air wall. They hotel needs to be able to have the audio system operate has one large unit (air wall open) or two discreet systems (air wall closed). As indicated in the example, a BGM CD player is shared between the two AA120Ms, via a "Y" cable, connected to input 5 of each mixer amp. The Bridge terminals of both amplifiers are connected together, through a DPST switch that makes (combines) or breaks (separates) the Bridge connections between the amplifiers. When the switch is closed, any audio signal into either amp will be present at both amplifier's speaker outputs. A volume control and DPST switch (see drawing for clarity) controls the room audio level and turns the music on or off in each room. For emergency evacuation purposes, a signal from the hotel's fire alarm system is connected to channel 1 of both amplifiers, with both channel's mute sensitivity adjusted as needed. To mute all audio when the emergency signal is present, all other channels are set for Mute receive.

Set Input 1 to Mute Send

Set Input 2-4 to Mute RCV

Dipswitch Settings

 

 

Dipswitch 1 - Off

Dipswitch 2

- Off (Master)

Dipswitch 3

- Off

Dipswitch 4

- Off (Not Affected)

Dipswitch 5

- Off (Not Affected)

Dipswitch 6

- Set to required gain

Dipswitch 7

- On (Mic)

Dipswitch 8

- On (Mic)

Dipswitch 9

- On (Mic)

Dipswitch 10 - Off (Tel/Line)

Specifications are subject to change without notice

AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. •

TELEPHONE: (800) 876-3333

FAX: (800) 765-3435

©2006 ATLAS SOUND LP

Printed in U.S.A.

00106

ATS002179 RevA 01/06

PP

 

 

 

 

19

Image 19
Contents AA120M Mixer Amplifier AtlasSound.comSafety Instructions AA120M Mixer Amplifier Table of ContentsIntroduction FeaturesApplications Message Conventions and Safety Symbols AA120M Mixer Amplifier Safety PrecautionsAtlasSound.com AA120M Mixer Amplifier Front Panel Description AA120M Mixer Amplifier Rear Panel Description DipswitchInput Inputs 2, 3, Input 1 TrimMute Sens For Vox Mute Bus Mute Send On/OffTape Out VOX Mute Switch For Channels 2, 3, 4,Zone 2 And Zone 3 Level Controls Input 6 Module SlotBridge Sel Pre OutPwr Bridge In/OutZone 2 Out Zone 2 And Zone 3 Mute Assign Special Internal FeatureRemote Mute Priority Mute Zone 3 OutCircuit Breaker VDC TerminalsRelay Loudspeaker TerminalsPower Cord Unswitched OutletAA120M Mixer Amplifier Quick Start Examples Dipswitch Settings OFF Example 3 Optional Plug-In Module Application Example 4 Remote Level Control Example 5 Hotel Room Combining Using Two AA120Ms BGM Source Security Plug Installation AA120M Mixer Amplifier Wiring the AA120MRack Mount KIT To VCA TerminalsOptional Input Transformer AA120M Mixer Amplifier Internal Jumper LocationsBlock Diagram for AA120M Sensitivity AA120M Mixer Amplifier SpecificationsAtlasSound.com AtlasSound.com Service Limited Warranty
Related manuals
Manual 1 pages 62.17 Kb