Viper (PD7170) installation instructions
CONNECTING THE AKPro ATTACHMENT PLATE AND CEILING MOUNT
(Planar/Premier PDS mount P/N 997-5351-00 and Phillips screwdrivers required)
1.Position the projector bottom-up on a soft surface. Consult the Attachment Plate Diagram for plate orientation, mounting hole locations and required screws and spacers for the Viper. Align the bottom part of the Planar/Premier PDS mount with the attachment plate holes and insert and tighten each M4x30 screw through an appropriate silver washer and lock washer, the designated holes in the Attachment Plate, then through the 5/8” nylon spacers and finally into the projector ceiling mount holes.
Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc.
Page 11
