Planar A480-PL user manual Programming

Page 17

Programming

Connect the included power adapter to the power input and connect a 3.5mm mini jack to 3.5mm mini jack cord that is long enough to reach from the Panamorph transport motor to the rear of the Planar projector (not included) to the “+12V Trigger In” on the Panamorph transport motor

Plug the other end of the 3.5mm mini jack into one of the two 12V triggers located on the rear panel of the projector.

With the lens in the “out” position, bring up the projector menu. Navigate to the “Control” tab and select “Letterbox” for the trigger that you attached 3.5mm cable from the Panamorph transport.

Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc.

Page 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Planar Model A480-PL Introduction Important Ceiling Mount Location Considerations Package Contents Page Ceiling side Connecting the AKPro Attachment Plate PD8130/PD8150 installation instructionsAttaching the Projector to the Ceiling Mount Mounting the ATH1 TransportPage Page Connecting the AKPro Attachment Plate and Ceiling Mount Viper PD7170 installation instructionsViper PD7170 Attachment Security Hook Hole Slots Attaching the Projector to the Ceiling Mount Page Final Adjustments ALL Installations Programming Page Aspect Ratio Matrix Cleaning
Top Page Image Contents