Phase One 645 AF manual Menu Mode, Capture Setup, Shutter

Page 68

6.6Menu Mode

Pressing the lower left button sets the P+ back in “Menu mode”

Entering Menu mode by pressing the lower left button allows you to set up all the preferences of the P+ back.

Menus are navigated by following the Enter, Exit, Up and Down arrows and pressing the corresponding buttons on the P+ back.

Whenever you want to exit to the main screen hold down the exit button (upper left button) for more than two seconds, and you will be back at the main screen.

When entering the menu mode you have three options: Capture Setup, Play Setup and Configuration.

Capture Setup

Capture Setup is where you setup preferences for the capture.

Enter the Capture Setup by pressing the enter button (lower left button)

In the Capture Setup you can select ISO, WB, FileFormat or Shutter.

By scrolling down with the down button you can select the options.

Shutter

Shutter refers to the shutter of the camera the P+ back resides on.

Due to the sleeping architecture of the P+ back, where the CCD is put to sleep to reduce power consumption, the P+ back needs to wake up before shooting. The timing of this wake up signal is referred to as the latency.

68

Image 68 Contents
User Guide Phase One Camera Trademarks & acknowledgements On rightsOn liability Contents Introduction Open Platform Freedom of ChoiceMicrosoft Windows WarrantyRecommended hardware Install on Windows Installing and Activation of softwareInstall on Mac OS Troubleshooting Deactivation of Capture One Screen calibration Body the system Unpacking the systemClassic PouchAccessories Box Value AddedChecking the Battery Power Batteries for cameraBatteries for the back Purchasing extra batteriesParts of the camera system Drive dial AF lock button Strap lugAttach and remove lens RemovingAttaching the back Display Buttons LED lightsSetting diopter Adjusting the StrapSetting date and time Eyepiece shutterPage ISO and White Balance Setting ISOBasic functions Easy Photography There are four exposure modes P program AEPage Measuring light Exposure Metering Exposure WarningsExposure compensation Set value is displayedFocus modes Out of focus MarksSingle focus mode S Continuous focus mode CManual Focus Mode M Focus AreasNormal focus area Spot focus areaManual Focus Operation for Telephoto and Zoom lenses Manual focusing Switch to M manual focus modeAdjust the focus When Auto Focus is Failed Using focus lock and infrared focusing Using the Focus Lock FunctionSet the focus mode selector lever to S or C Adjust the compositionAF Assist Infrared Light Single-Frame Mode Continuous ModeMirror up mode Self-Timer ModeProgram Shift PH/PL Exposure ModesProgram AE Aperture Priority AE Av Shutter Priority AE TvManual Mode M One-push shift function ModeFlash photography This camera’s synchro contact is an X contactPage Example Rear Curtain SyncroFlash compensation settings Viewfinder LCD readoutsExposure mode Exposure compensation display Advanced functionsExposure Compensation With the exposure compensation dialAE Lock Metered-value difference indicator Auto Bracketing Press the shutter release buttonSingle-Frame Mode S Continuous Mode CManual mode Taking photos with the mirror upLong exposure Bulb Mode Camera display lightSetting will be stored after one second Front/rear dial lock mechanismsDepth of field Depth of Field Preview ButtonInfrared photography Page Driver set-up ConnectingTethered shooting Tethered operations Back CF card usage Inserting and ejecting cards on the P+ backCF card usage 3S the Secure Storage System Disk Check summaryGeneral handling guidelines Using cards in the card readerCF card usage in general Mounting and dismounting card on computers Preparing the CF-cardsRecommended formatting is by using the back Formatting on a Mac OS X computerNavigating the Back menu Menu buttonsHome shortcut File format shortcut Battery and Power Indicator Button Lock shortcutPlaymode Playmode zoom functions View modesDelete Exit the Play modeBrowsing inside Zoom Shutter Menu ModeCapture Setup FileFormat ISO White BalanceCustom white balance from Capture One Auto Preview Play SetupBacklight Delete options BrightnessStorage ConfigurationPower Source Disk Checking Power SaveFormat disk Time & Date Restore def. DefaultsReady beep Language About the P+ Back Page Setting custom functions Custom functionTypes of custom functions Cancel auto bracket Manual mode bracketingFront/Rear dial function exchange in manual mode Rear function dial enabled/disabledAFL function lock mode Mode one-push settingBulb exposure time setting Bulb shutter release settingCustom function reset Auto film loading settingMultiple exposure mode Digital back CF configurationInitial setting Custom Functions overviewFunctions of the Phase One lens Lenses and Multi MountFunction of the Phase One lens adaptor Limitationcodes List of alternative lensesProducer Specs limitations Adaptor/mount What is Lens Cast? Why does lens cast occur?How to get rid of Lens Cast? Lens Cast4 simple steps to calibrate on fixed lenses MAC Large format and stitched images MAC4 simple steps to calibrate on fixed lenses PC Large format and stitched images PC Page Software Getting startedImporting from CF card Large format and technical cameras Large format photographyTechnical cameras Maintenance Changing the focusing screenBattery socket Tripod/Electronic shutter release contactCamera display error-notification LCDCleaning the CCD Lens maintenanceBack Maintenance Housing specification Actual Image Size 56x41.5 mm11.8 P+ series Technical specifications End User support Policy World Wide Dealer NetworkOn-Line Support FAQ, Tutorials & DocumentationKnowledge Base Capture One On-line Support Forums 106