Phase One 645 AF Flash sync. timing, Copy custom function, Custom function reset, Index setting

C-27 Flash sync. timing

When a moving subject has been shot using the flash, a flash of light will appear ahead of the subject’s movement under the initial setting. This function makes it possible to change this so that the flash of light comes after the moving subject as illustrated.

0:No (front curtain synchronization: initial setting)

1:Yes (rear curtain synchronization)

C-28 Copy custom function

This function is used to group all the user symbol settings selected (custom functions that have been set) together with the other user symbols, and copy them.

0:No (initial setting)

1:Yes (copied to user A)

2:Yes (copied to user B)

3:Yes (copied to user C)

C-29 Custom function reset

This function is used to group all the user function settings selected from C-01 to C-27 together, and initialize them (to the default settings).

0:No (initial setting)

1:Yes

C-30 Shutter release without film

This function is used to set whether the shutter is to be tripped even when the film has not been loaded.

0:No (initial setting)

1:Yes

C-31 Auto film loading setting

This function is used to set whether to feed the film (to the first frame) by halfpressing the shutter button or by closing the rear cover when the film has been loaded. The film can be fed to the first frame by halfpressing the shutter button even when the rear cover close has been established as the setting.

0: By half-pressing the shutter button (initial setting)

1: By closing the rear cover

When the camera is in sleep mode, the film will not start moving even when the rear cover is closed. Half-press the shutter button.

C-32 Multiple exposure mode

This function is used to select whether, during multiple exposure shooting, the multiple exposures are to be taken by pressing the shutter button until the multiple exposure button is pressed after the number of multiple exposures has been set (initial setting). When the number of multiple exposures is set, the film is wound up by one frame after the completion of the number of multiple exposures.

0:Until the multiple exposure button is pressed (initial setting)

1:Multiple exposure number is set

C-33 Digital back CF configuration

This function is used to select the user function (A, B or C) when an MSCElisted digital pack has been loaded.

0:No (initial setting)

1:A

2:B

3:C

C-34 Clock/calendar setting

This function is used for setting the calendar and clock.

C-35 Index setting

This function is used for setting the index numbers. – ONLY relevant when using filmback.

C-36 firmware version -

Press+/- to view firmware version: number on top of display is body firmware. Number on bottom of display is firmware number for the mounted lens.