Phase One 645 AF manual Types of custom functions

Page 81

7.2Types of custom functions

C-00 Custom functions No.

0:[Initial setting]

1:A

2:B

3:C

When “0” has been selected and set, none of the custom items can be set. “1,” “2” or “3” must be selected and set without fail.

C-01 Steps of aperture, shutter speed, exposure compensation. This function is used to set the shutter speed, f-number and exposure compensation value step width.

0:0.3 (1/3EV step: initial setting)

1:0.5 (1/2EV step)

2:1.0 (1EV step)

C-02 Data imprinting

This function is used to set whether to imprint the shooting data on the film.

0:No imprinting (initial setting)

1:Yes (data, index)

2:Yes (date, index)

C-03 Aperture setting after lens change

This function is used to set the f-number display method for the previously used lens when the lenses have been changed over. The initial setting is “Yes,” in which case the f-number of the lens prior to the changeover is displayed.

0:Yes (previous f-number: initial setting)

1:Aperture open

2:Minimum aperture setting

3:Number of stops from open

C-04 Metered value display time

This function is used to set the time it should take for sleep mode to be established after the camera’s power is turned on. The initial setting is 15 seconds.5, 10, 15, 20, 25, 30, 40, 50, 60 or “on” can be selected and set. Note that the batteries will discharge when “on” (no sleep mode) has been set.

C-05 Range of exposure compensation

This function is used to set the maximum extent of exposure compensation. Its setting takes effect in AE shooting modes (P, Tv and Av).

0:±3EV (initial setting)

1:±5EV

C-06 External LCD backlight

This function is used to set the method for lighting the backlight of the external LCD panel.

0:Set using Backlight button (initial setting)

1:Always on (metering retention period)

C-07 Select battery

This function is used to set the batteries used in the camera so that the remaining battery charge will be displayed correctly on the external LCD panel.

0:Primary batteries (alkaline/manganese batteries, lithium batteries: initial setting)

1:Secondary batteries (nickel-metal hydride batteries, nickel-cadmium batteries)

C-08 Bracketing order

This function is used to set the shooting sequence for auto bracketing. The initial setting is “n-u-o” (normal/under/over). The shooting sequence for 2-frame bracketing is set in auto bracketing setting mode.

0:n-u-o (normal/under/over: initial setting)

1:n-o-u (normal/over/under)

2:u-n-o (under/normal/over)

3:o-n-u (over/normal/under)

81

Page 80 Page 82
Image 81
Page 80 Page 82
Contents User Guide Phase One Camera On rights On liabilityTrademarks & acknowledgements Contents Open Platform Freedom of Choice IntroductionWarranty Recommended hardwareMicrosoft Windows Installing and Activation of software Install on Mac OSInstall on Windows Troubleshooting Deactivation of Capture One Screen calibration Unpacking the system Body the systemClassic PouchValue Added Accessories BoxBatteries for camera Checking the Battery PowerPurchasing extra batteries Batteries for the backDrive dial AF lock button Strap lug Parts of the camera systemRemoving Attach and remove lensAttaching the back Display LED lights ButtonsAdjusting the Strap Setting diopterEyepiece shutter Setting date and timePage Setting ISO Basic functionsISO and White Balance There are four exposure modes P program AE Easy PhotographyPage Exposure Warnings Measuring light Exposure MeteringSet value is displayed Exposure compensationOut of focus Marks Focus modesContinuous focus mode C Single focus mode SFocus Areas Manual Focus Mode MNormal focus area Spot focus areaManual focusing Switch to M manual focus mode Adjust the focusManual Focus Operation for Telephoto and Zoom lenses When Auto Focus is Failed Using the Focus Lock Function Using focus lock and infrared focusingSet the focus mode selector lever to S or C Adjust the compositionAF Assist Infrared Light Continuous Mode Single-Frame ModeMirror up mode Self-Timer ModeExposure Modes Program AEProgram Shift PH/PL Shutter Priority AE Tv Aperture Priority AE AvManual Mode M Mode One-push shift functionThis camera’s synchro contact is an X contact Flash photographyPage Rear Curtain Syncro ExampleViewfinder LCD readouts Flash compensation settingsAdvanced functions Exposure mode Exposure compensation displayExposure Compensation With the exposure compensation dialAE Lock Metered-value difference indicator Press the shutter release button Auto BracketingContinuous Mode C Single-Frame Mode STaking photos with the mirror up Manual modeCamera display light Long exposure Bulb ModeFront/rear dial lock mechanisms Setting will be stored after one secondDepth of Field Preview Button Depth of fieldInfrared photography Page Connecting Tethered shootingDriver set-up Tethered operations Back Inserting and ejecting cards on the P+ back CF card usageDisk Check summary CF card usage 3S the Secure Storage SystemUsing cards in the card reader CF card usage in generalGeneral handling guidelines Preparing the CF-cards Mounting and dismounting card on computersFormatting on a Mac OS X computer Recommended formatting is by using the backMenu buttons Navigating the Back menuFile format shortcut Home shortcutButton Lock shortcut Battery and Power IndicatorPlaymode View modes Playmode zoom functionsExit the Play mode Browsing inside ZoomDelete Menu Mode Capture SetupShutter FileFormat White Balance ISOCustom white balance from Capture One Play Setup BacklightAuto Preview Brightness Delete optionsConfiguration Power SourceStorage Power Save Format diskDisk Checking Restore def. Defaults Ready beepTime & Date Language About the P+ Back Page Custom function Setting custom functionsTypes of custom functions Manual mode bracketing Cancel auto bracketFront/Rear dial function exchange in manual mode Rear function dial enabled/disabledMode one-push setting AFL function lock modeBulb exposure time setting Bulb shutter release settingAuto film loading setting Custom function resetMultiple exposure mode Digital back CF configurationCustom Functions overview Initial settingLenses and Multi Mount Functions of the Phase One lensFunction of the Phase One lens adaptor List of alternative lenses Producer Specs limitations Adaptor/mountLimitationcodes Why does lens cast occur? What is Lens Cast?How to get rid of Lens Cast? Lens CastLarge format and stitched images MAC 4 simple steps to calibrate on fixed lenses MAC4 simple steps to calibrate on fixed lenses PC Large format and stitched images PC Page Getting started SoftwareImporting from CF card Large format photography Large format and technical camerasTechnical cameras Changing the focusing screen MaintenanceTripod/Electronic shutter release contact Battery socketLCD Camera display error-notificationLens maintenance Back MaintenanceCleaning the CCD Actual Image Size 56x41.5 mm Housing specification11.8 P+ series Technical specifications World Wide Dealer Network End User support PolicyFAQ, Tutorials & Documentation Knowledge Base Capture One On-line Support ForumsOn-Line Support 106

645 AF specifications

The Phase One 645 AF is a high-end medium format camera system designed for professional photographers seeking exceptional image quality and versatility. With its robust feature set and advanced technologies, it has become a preferred choice for commercial, portrait, and landscape photography.

At the heart of the 645 AF is its large 645-format sensor, which captures images at a remarkably high resolution. This sensor size not only ensures more detail in each shot but also provides superior dynamic range, allowing photographers to reproduce subtle lighting nuances in their work. The high pixel count is complemented by Phase One’s exceptional image processing capabilities, making it an ideal choice for large print production and high-fidelity image requirements.

One of the defining characteristics of the Phase One 645 AF is its modular design. Photographers can easily swap out different components, such as lenses and digital backs. This flexibility allows users to tailor their camera system to specific shooting requirements, whether that means switching to a high-resolution back for studio work or a faster one for dynamic scenes. The system is compatible with a wide range of Phase One lenses, which are known for their sharpness and optical quality.

The camera features a fast and accurate autofocus system, making it suitable for a variety of shooting conditions. With multiple focus points and advanced tracking capabilities, the 645 AF ensures that subjects are captured with precision, even in fast-paced environments. Additionally, the camera supports various shooting modes, including continuous shooting, which is crucial for capturing fleeting moments.

Another impressive technological advancement of the 645 AF is its robust build quality. Designed to withstand the rigors of professional use, the camera employs weather-sealed construction, ensuring reliable performance in challenging conditions. The ergonomic design provides comfortable handling during long shoots, making it a practical choice for professionals.

Moreover, the Phase One 645 AF integrates seamlessly with the company's Capture One software, allowing photographers to process their images efficiently. This software offers extensive editing capabilities, ensuring that images can be fine-tuned to meet artistic standards.

In summary, the Phase One 645 AF stands out in the world of medium format photography. Its impressive resolution, modular design, superior autofocus capabilities, and rugged construction make it a powerful tool for photographers who demand the very best. By combining state-of-the-art technology with a commitment to quality, the Phase One 645 AF continues to be a benchmark in professional photography.
Top Page Image Contents