Macsense Connectivity SCC-B2311P, SCC-B2011P, SCC-B2310 Connect the auto iris lens connector

Page 12

User’s guide

Connect the auto iris lens connector

E

Remove the sheath round the iris control cable and connect it to each of the auto iris lens connector as described below.

Pin Number	DC Control Type	Video Control Type

1	Damp(–)	Voltage (+12V)

2	Damp(+)	Not Used

3	Drive(+)	Video Signal

4	Drive(–)	Ground

11

Image 12

Contents Part No. AB68-00615A SCC-B2311 SCC-B2310 SCC-B2311P SCC-B2011P Important Safety Instructions Safety Precautions Page Table Of Contents Overview Features DNRDigital Noise Reduction On the image. Especially, it’s useful to use LSS Sense-UpPackage Below are included in the product packageInstallation and Use Instructions Connect the auto iris lens connector Install the lens Position the selection switch Adjust the back focus Lens without zooming feature④ Fasten the screw of the adjustable ring of the flange back Connect the cables and check the operation User’s guide Parts & Description ③ Auto Iris Lens Connector AC24V/DC12V Models SCC-B2311, B2310, B2311P For SCC-B2011P Connects to AC SW1 L/LSW3 FL ⑥ Function SWITCH-2 SW1AGCSW4AWB Specifications 【 SCC-B2311, SCC-B2310 】【 SCC-B2311P, SCC-B2011P 】 3IT, S-HAD-CCD