User’s guide
camera in the internal sync mode occurs a skip every time it moves to other scene. However, this can be solved by positioning the L/L switch to ON and using the level bar to
Eadjust the vertical sync phasing.
-If your camera uses DC 12V for power source, it operates in the internal mode regardless of the position (On/Off) of the L/L switch.
2)SW2(ELC) :
Use this for the manual iris lens. If set to ON, the electronic shutter speed varies between 1/60 and 1/120,000 second to keep the screen brightness proper. However, you must position this switch to OFF if you are using the auto iris lens (DC or Video control type). Because, in this mode, the camera can show the color rolling effect when operating under the mechanical fluorescent lightning. If this happens, apply the AC power and set the SW1 (L/L) to ON. (NTSC: 60Hz, PAL: 50Hz)
3)SW3 (FL) :
It is an
※Note : If SW2 (ELC) is set to ON, the
22