Macsense Connectivity SCC-B2311P, SCC-B2011P, SCC-B2310 manual

Page 5

User’s guide

5.When mounting the camera on a wall or ceiling, fasten it safely and securely. (A falling camera may cause personal injury.)

6.Do not place conductive objects (e.g., screwdrivers, coins, and metal things) or containers filled with water on top of the camera. (Serious injury may result from fire, electrical shock, or falling objects.)

7.Do not install the unit in humid, dusty, or mines locations. (Doing so may cause fire or electrical shock.)

E8. If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center. (Continued use in such a condition may cause fire or electrical shock.)

9.If this product fails to operate normally, contact the store of purchase or your nearest service center. Never disassemble or modify this product in any way. (Problems caused by unauthorized user disassembly or repairs are not covered by your warranty.)

10.When cleaning, do not spray water directly onto parts of the product. (Doing so may cause fire or electrical shock.) Gently wipe the surface with a dry cloth. Never use detergents or chemical cleaners on the product, as this may result in discoloration of surface or cause damage to the finish.

11.To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

Cautions

1.Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibration or magnetic interference.

2.Do not install in a location subject to high temperature, low temperature, or high humidity. (Doing so may cause fire or electrical shock.)

3.Avoid a location which is exposed to direct sunlight, or near heat sources such as heaters or radiators.

(Neglecting to do so may result in a risk of fire.)

4.If you want to relocate the already installed product, be sure to turn off the power before moving or reinstalling it.

5.Install in a well-ventilated location.

6.Remove the power plug from the outlet when there is a lightning storm. (Neglecting to do so may cause fire or damage to the product.)

4

Image 5
Contents Part No. AB68-00615A SCC-B2311 SCC-B2310 SCC-B2311P SCC-B2011P Important Safety Instructions Safety Precautions Page Table Of Contents Overview Features On the image. Especially, it’s useful to use LSS Sense-Up DNRDigital Noise ReductionBelow are included in the product package PackageInstallation and Use Instructions Connect the auto iris lens connector Install the lens Position the selection switch Lens without zooming feature Adjust the back focus④ Fasten the screw of the adjustable ring of the flange back Connect the cables and check the operation User’s guide Parts & Description ③ Auto Iris Lens Connector AC24V/DC12V Models SCC-B2311, B2310, B2311P SW1 L/L For SCC-B2011P Connects to ACSW3 FL SW1AGC ⑥ Function SWITCH-2SW4AWB 【 SCC-B2311, SCC-B2310 】 Specifications3IT, S-HAD-CCD 【 SCC-B2311P, SCC-B2011P 】