Micron Technology USB Camera manual Flip Image, Average Frames

38

SMX-M8xx Series USB2.0 Camera User Guide

●The Nearest Color mode: the Bayer matrix from sensor is transformed into destina- tion stream using the Nearest Color algorithm (the fastest algorithm that gives the worst image quality (compared to other algorithms)

●The Bilinear mode: the Bayer matrix from sensor is transformed into destination stream using Bilinear algorithm (slower algorithm that gives better quality)

●The Laplacian mode: the Bayer matrix from sensor is transformed into destination stream using Linear Interpolation with Laplacian second-order correction terms (the slowest algorithm that gives the best quality)

Note: The Color Mode section is disabled when running the SMX-M81M Camera (see Figure 7-2 Device Settings win- dow for the SMX-M81M Cameras)

Figure 7-2Device Settings window for the SMX-M81M Cameras

Flip Image

Use Flip Image controls to flip the image horizontally and/or vertically

●Horizontal flipping is done by the camera software (as a result, frame rate may decrease, see chapter “Frame Rate Control” )

●Vertical flipping is done by the camera hardware

Average Frames

The Average Frames controls are used to increase the image quality by compensating the random noise of the sensor

There are two averaging modes:

●Last N frames: the currently displayed frame is the average of the last N frames. The picture is updated every frame

Camera Device Settings: Flip Image