40
SMX-M8xx Series USB2.0 Camera User Guide
Auto White Balance Software
Checked Auto White Balance Software performs White Balance (Soft) automatically every time when you move the Brightness, Contrast and Gamma sliders of the Image Corrections tab.
Note: Auto White Balance Software is disabled when running the
Frame Rate Control
The speed of the camera is measured in fps (frames per second). The value means the number of frames (images) given by the camera per second. In the
You can see the frame rate value in the right corner of the status bar in the main window of the
To open the Frame Rate Control window, click the Frame Rate… button in the Device
Settings window. The Frame Rate Control window will open (see Figure
Control window).
Figure 7-3 Frame Rate Control window
The Set Default button sets the default value of frame rate for the camera with current settings. The default value is flashed in every camera and is applying automatically when the camera's settings are changed.
Note: It is recommended to use the default value of frame rate as the most suitable for the Snapshot Loop mode
The Set Maximum button sets the maximal possible value of frame rate for the camera with current settings.
To change the Frame Rate value manually, do the following:
1. Open the Frame Rate Control window
2. In the Frame Rate field enter the value you need
3. Click Set
The current frame rate value should change according to the one you entered in the Frame Rate Control window. Check it when running video: the frame rate value will be displayed in the right corner of the status bar of the main application window.
Note: The real frame rate value may vary in the range of
Camera Device Settings: Auto White Balance Software