Jensen KT7009A owner manual Setting Single / Multiple Snapshot, Setting Self-timer

Apply “Fluorescent 1” under traditional fluorescent lamp. Apply “Fluorescent 2” under high intensity fluorescent lamp.

Apply “AWB” for auto white balance setting or when you are not sure what is the best option to set.

Setting Single / Multiple Snapshot

The shutter button can act as a normal shutter for single picture shooting. This camera also supports multiple shooting by a single shutter key press.

Single Snapshot

Burst Snapshot

Turn on the camera and make sure it is in Capture mode.

Press “Menu” button and use “up”/ “down” button till the cursor on “Burst Snapshot” in the menu on the LCD Screen, then use “Left” and “Right” to choose between “Single” or “Burst” snapshot.

The multiple snapshot operates with 3 picture capturing sequentially. It supports only with 800x600 resolution picture.

Setting Self-timer

Your camera is designed with a self-timer function, which allows you to take pictures with built-in timer.

Turn on the camera and make sure it is in Capture mode.

Press “Menu” button and use “up”/ “down” button till the cursor on “Self timer” in the menu on the LCD Screen, then use “Left” and “Right” to choose self-timer interval setting of “OFF”, “10 sec”, “15 sec” or “20 sec”.

Press “Menu” button again to exit menu setting. Next time while taking a picture, the camera will count

21