Linksys WVC11B manual Mode Settings

Wireless-B Internet Video Camera

9.The Mode Settings screen will appear. Click the Infrastructure radio button if you want the Camera to communicate using an access point or wireless router. Click the Ad-Hoc radio button if you want the Camera to communicate without using an access point or wireless router. Click the Next button.

10.The Basic Settings screen will appear, so you can change the wireless settings. Enter your wireless network’s SSID or network name. If you chose Ad-Hoc mode, select the channel at which the network broadcasts its wireless signal.

•SSID. The SSID must be identical for all devices in a wireless network. It is case-sensitive and should have 32 alphanumeric characters or fewer. (You can use any keyboard character, but do not use any spaces.)

•Channel. If you set the Camera to Ad-Hoc mode, select the appropriate channel from the drop-down menu. All devices in your wireless ad-hoc network must use the same channel in order to function correctly.

Then click the Next button.

Figure 5-8: Mode Settings

Figure 5-9: Basic Settings (Wireless)

Chapter 5: Setting up and Mounting the Wireless-B Internet Video Camera 13

Setup Wizard