Chapter 2 | 2 |
Basic Setup |
This Chapter provides details of installing and configuring the LevelOne IP Network Camera.
System Requirements
•To use the LAN interface, a standard 10/100BaseT hub or switch and network cable is required.
•To use the Wireless interface on the
Installation
Figure 3: LevelOne IP Network Camera Installation
1. Mount the Camera on the supplied Base and Stand.
Join the Base, stand and swivel connector to the camera, as shown in the diagram above.
2. Connect the LAN Cable
Connect the LevelOne IP Network Camera to a 10/100BaseT hub or switch.
5