Physical Details
Figure 2: LevelOne IP Network Camera
Front-mounted LEDs
Ready
Active
LAN
Wireless (WCS-2000 only)
On - Power on. Off - No power.
Blinking - The Ready LED will blink during start up. This will take 15 to 20 seconds.
Off - Idle.
Blinking - LevelOne IP Network Camera is providing a live video stream to at least one viewer.
On - LAN port is active.
Off - LAN port is not available.
Blinking - Data is being transmitted or received via the LAN port. On - Wireless interface is active.
Off - Wireless interface is not available.
Blinking - Data is being transferred via the Wireless interface.
Rear Panel
Power Input | Connect the supplied power adapter here. |
LAN port | Use a standard LAN cable to connect your LevelOne IP Network |
| Camera to a 10/100BaseT hub or switch. |
Reset Button | This button has two (2) functions: |
| • Restore Default IP Address. When pressed and released, the |
| LevelOne IP Network Camera will reset its IP address to the |
| default value |
| • Restore Default IP Address, Administrator ID, and |
| Administrator password. When pressed and held or 3 |
| seconds, the IP address, Administrator ID, and Administrator |
3