Wireless-G Internet Video Camera
Find
To find a Camera on your local network or the Internet, click the Find button. There will be two tabs available, LAN and Internet.
LAN
The LAN screen shows the Cameras found on your local area network, along with the status information for each Camera.
Cameras on LAN
The Utility will search for Cameras on the local area network and display a list in the Cameras on LAN box. To run a new search, click the Refresh button.
For the Camera whose name is currently selected in the Cameras on LAN box, the following information will be displayed:
Camera Info
Camera Name. The name you gave to the Camera.
Description. The information about the Camera that you entered.
Address. The Camera’s IP address.
Port Number. The port number the Camera uses for communication.
Login. If you set up the Camera with a name and password, then you will need to enter them here in order to access the Camera.
Name. Enter the login Name.
Password. Enter the login Password.
To add a Camera to the Utility’s list, select the Camera you wish to add by clicking its name in the Cameras on LAN box. Then click the Add button. You will be notified when the Camera has been added. Click the OK button.
Chapter 6: Installing and Using the
Figure 6-9: Find Camera from LAN Screen
Figure 6-10: Camera Added Successfully Screen
20
Using the Viewer & Recorder Utility