Foreword

Audio Analogue is not responsible for

Problems arising from improper use and maintenance of the device.

Damage occurring after service or modification carried out by unauthorized personnel. Defects arising from normal wear and tear.

No part of this manual may be reproduced, transmitted or copied for public and/or private use, without the permission of Audio Analogue. The contents of this manual are correct at the time of printing, however AUDIO

ANALOGUE reserves the right to amend the contents of this document without prior notice.

The device is designed and manufactured following European Community Directives 89/336/CEE and /72/23/CE and is CE approved.

The device must not be used for purposes other that for which it is expressly designed.

AUDIO ANALOGUE cannot be held responsible for accidents or damage due to improper use of the device.

WARNING

When carrying out any operation, be sure to follow the safety guidelines described in this manual.

Avoid opening the unit. No further servicing than that described in this manual should be attempted. Refer to

all servicing to authorized AUDIO ANALOGUE dealers and qualified technicians.

If the rules described in this manual are not respected, the warranty will cease as a consequence.

SAFETY PRECAUTIONS AND MAINTENANCE

ATTENTION: before using or attempting any service operation on the unit, please take time to read this manual.

In order to prevent any danger of accident, the following rules must be respected

Switch on the unit only after ensuring correct installation according to the instructions contained in this manual. Do not install the unit where there may be extreme changes of temperature and humidity.

Ensure that any labels showing safety information are visible and in good condition.

Place the unit on a hard, flat surface not covered by carpet or other soft material, and allow at least 6 inches clearance all around the cabinet. The ventilation holes should not be obstructed, to avoid the amplifier overheating. Do not install the unit near radiators or heat sources and allow adequate ventilation at all times.

Do not switch on the unit until it is correctly installed.

Connect the unit to the AC mains supply as indicated on the label. If in doubt, refer to a qualified technician. This unit must be earthed. As its enclosure is made of metal, a loose or missing earth may be dangerous. If the AC power cord is damaged, it must be replaced with another of the same type. Take care to unplug at the wall socket before doing so.

Always replace fuses with same type.

Do not use the unit near water or any type of liquid. If liquid spills into the unit, immediately unplug the power cord from the wall socket avoiding touching the metal case of the unit. Refer to a qualified technician to inspect the unit before operating it again.

Do not place any container containing liquid on top of the unit, even if switched off. Keep the unit away from heat sources such as direct sunlight, cookers, radiators, etc. Always disconnect the power cord from the wall socket during a thunderstorm. Always switch off and disconnect the unit from the mains supply before cleaning.

Cleaning externally: wipe gently with a soft, dry cloth. Never use any solvents or alcohol-based cleaning liquids. If the unit is moved from a cold place to a warm one, condensation may form inside it which could cause malfunctioning. To avoid this, allow the unit to stand at least 1 hour to gradually reach room temperature. Unplug the unit from the mains if unused for long periods.

For the UK OnIy

To fit a mains plug, please follow these instructions:

The wires in the mains Iead are coloured in accordance with the following code:

- Green/Yellow	Earth (E)
- Blue	Neutral (N)
- Brown	Live (L)

As the colours of the wires in the mains Iead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol …, or coloured green and yellow;

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black;

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

13 Amp plugs must have a 3 Amp fuse fitted.

SIX CHANNELS POWER AMPLIFIER specifications

The Audio Analogue SRL Six Channels Power Amplifier represents a significant advancement in audio technology, merging performance and precision in a robust design. This amplifier is specially engineered for music and home theater applications, providing an immersive audio experience for both casual listeners and audiophiles alike.

One of the standout features of the Audio Analogue SRL is its six-channel configuration, which allows for multi-channel audio setups. This makes it an ideal choice for surround sound systems, ensuring that each channel delivers superb clarity and dynamic range. Each channel can output significant power, capable of driving even the most demanding speakers with ease.

The amplifier employs a class AB topology, known for its excellent efficiency and minimal distortion. This design allows the SRL to maintain high fidelity while delivering ample power, making it versatile enough for various audio applications. With a total output power rating that exceeds many of its competitors, users can expect a cinematic audio experience with every use.

In addition to its power capabilities, the Audio Analogue SRL features advanced circuitry to maximize audio performance. This includes high-quality capacitors and resistors that contribute to the amplifier's low noise floor and wide frequency response. The engineering team's focus on minimizing signal degradation ensures that audio reproduction remains true to the original recording.

Connectivity is another strong suit of the Audio Analogue SRL Six Channels Power Amplifier. It offers an array of input options, including XLR balanced inputs and RCA unbalanced inputs, making it compatible with various audio sources. Additionally, the amplifier features robust speaker terminals that accommodate various cable types and sizes, ensuring secure connections that enhance signal quality.

Thermal management is also a key aspect of its design. The SRL incorporates adequate heat dissipation technology, preventing overheating during extended use. This durability allows the amplifier to perform at high levels without compromising sound quality or reliability.

Overall, the Audio Analogue SRL Six Channels Power Amplifier is a commendable choice for anyone looking to elevate their audio experience. With its powerful performance, sophisticated design, and attention to detail, it promises to deliver breathtaking sound quality for music and movie enthusiasts alike. Whether you are setting up a dedicated home theater or a high-fidelity music system, the SRL amplifier stands out as a top contender in the world of audio amplification.