Installing Your Interface

INTERFACES

Step 1. Please attach the VA6822 Interface on the rack using the provided rack mount hardware or on/under furniture using the optional TM Series ALTINEX brackets.

Step 2. Connect one end of the input cable to the video output connector of the source computer and the other end to the computer input port of the VA6822.

Step 3. Connect an audio input cable’s 3.5mm plug to the audio output of a source computer and the other end to the audio input connector of the VA6822. If needed, use a similar cable to connect the audio output of the VA6822 to a speaker or audio equipment.

Step 4. Connect the local monitor output connector of the VA6822 to a local monitor or display using the appropriate ALTINEX Local Monitor cables. It is not necessary to terminate this output with a termination plug if a local monitor is not being used.

Step 5. Connect one end of a coaxial cable to the main output of the VA6822 and the other end to the RGBHV/RGBS input on the projector or monitor. Usually either a 4 BNC or 5 BNC coaxial cable is used, depending on whether the display devices require composite sync (RGBS) or separate horizontal and vertical sync (RGBHV) signals.

Step 6. Connect the main audio output from the VA6822 through the provided 5-position terminal block to the input of a sound system amplifier.

Step 7. Make sure that the dip- switches are set as described in section 7.

Step 8. Using the provided power cable for your country of usage, connect the power input IEC connector to the AC wall outlet. The power supply used in the VA6822 is universal so it can accept from 100 VAC

to 240 VAC 50/60Hz. It is not necessary to change any voltage selection settings on the VA6822. The LED on the front and back panel of the VA6822 will light GREEN if the appropriate input signal is present and will remain RED if a valid input is not detected.

Step 9. It is recommended that you move the VA6822’s horizontal position dial to the far right facing the front until it clicks. This will disable the movement of the horizontal position of the image. The horizontal position of the image should first be adjusted using the control provided by the monitor or projector. If further adjustments are still required, then image can be adjusted using the horizontal position control dial located on the front of the VA6822.

Step 10. Adjust the equalization channels for the Red, Green, and Blue channels to get the best possible image on the display. It is recommended to increase equalization on all three channels simultaneously until the picture is perfect.

VA6822 specifications

The Altinex VA6822 is a versatile and innovative solution designed to meet the evolving needs of modern presentation environments. As a part of Altinex's diverse range of AV products, the VA6822 is specifically engineered to facilitate seamless integration of various audio-visual devices, making it an ideal choice for conference rooms, classrooms, and other collaborative spaces.

One of the primary features of the VA6822 is its ability to support multiple video formats, including HDMI, DisplayPort, and VGA. This flexibility allows users to connect various devices from laptops to projectors, ensuring compatibility with a wide array of equipment. Enhanced with automatic input detection, the VA6822 intelligently identifies the connected source, providing users with a hassle-free experience without the need for manual adjustments.

The VA6822 also boasts a compact and elegant design, which can easily blend into any environment without being obtrusive. Its robust construction ensures durability while maintaining a lightweight profile, making it easy to install in both new and existing setups. The device is engineered for efficiency, with low power consumption that meets the demands of eco-conscious users.

An important technological highlight of the VA6822 is its advanced video scaling capabilities. With the ability to output high-resolution video at up to 4K, users can experience crystal-clear images and sharp graphics. This feature is particularly beneficial in professional settings, where detail is crucial for effective communication and presentations.

In addition to its video capabilities, the VA6822 includes audio routing features that enhance sound clarity. It supports both analog and digital audio formats, allowing for a seamless audio experience across different devices. When paired with compatible audio systems, users will appreciate the high-quality sound that this unit can deliver.

Furthermore, the VA6822 offers intuitive control options. Users have the ability to manage the device through various methods, including front panel buttons, remote control, or even control via RS-232 for integration with third-party control systems. This level of control simplifies operation, making it accessible for users of all technical skill levels.

In summary, the Altinex VA6822 is an advanced AV solution featuring multiple input formats, superb video scaling capabilities, and versatile audio routing options. Its user-friendly design and flexible integration make it an invaluable asset for any presentation environment, helping to enhance collaboration and communication in today’s fast-paced world.