Altinex VA6822 manual Mounting Capability, Power Requirements, Bandwidth, Equalization

Page 7

INTERFACES

Please note that using a longer cable or a non- ALTINEX cable for remote horizontal position could affect the stability of the picture by creating unwanted jitter.

4.5 MOUNTING CAPABILITY

The VA6822 can be easily mounted into an equipment rack. Four mounting holes are provided on each side of the unit. To mount a single unit, use ALTINEX 19”-1U Rack Mount Ears (part # DA1294FC). To mount two units in tandem, use an ALTINEX 19”-1U Rack Mount Shelf (part # DA1293FC). For under the table mounts, optional brackets like the TM1271, TM1272, TM1273, or TM1274 can be used.

4.6 POWER REQUIREMENTS

The VA6822 may be used anywhere in the world where the voltage is from 100 to 240 volts AC at 50/60 Hz. For the safety of the user and for protection of the unit, make sure that the input voltage of the VA6822 is in the range of 100 to 240VAC. The unit is auto-switchable so that no user adjustments are necessary when switching from 120 to 220VAC for different countries. The LED located on the front and back panel should light RED or GREEN when valid power input is transmitted to the VA6822.

4.7 BANDWIDTH

The typical bandwidth of the VA6822 is 425 MHz. The minimum bandwidth is 350 MHz. This exceptionally high bandwidth allows passing of the third harmonics of the video signal, thus maintaining the highest quality of the video signal. The VA6822 can easily pass signals from VGA through UXGA. The signal quality at the display/ target will depend upon the type and quality of cable used.

4.8 EQUALIZATION

6

The VA6822 has a high bandwidth of 350 MHz allowing high-resolution signals to pass through the unit without attenuation for a long run. For cable runs longer than 100ft, the signal attenuates at medium and/or high frequency. To correct this cable attenuation problem, the VA6822 is

equipped with a feature called Equalization/Peaking on the front panel for each video signal: red, green, and blue. These channels can be equalized individually. Starting from step one on the dial, equalization can be increased to step E for longer cable lengths in increments of 25ft with a slotted screw driver. Before increasing to the next level, check the sharpness of the picture on the display. If the picture is sharp enough, do not increase it to the next level.

With a good quality of output cables and a strong input signal, the VA6822 can drive signals up to 300ft with minimal loss of the signal quality.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents VA6822 Table of Contents Precautions / Safety Warnings About Your Interface Technical SpecificationsVA6822 Description Computer Video Input VGA Compatible 15-PIN HD ConnectorHorizontal Position Adjustment Local Monitor Output 15-PIN HD ConnectorMain Output Through 5 BNC Connectors Connector Main Dual Output 6-BNC FemaleEqualization Power RequirementsMounting Capability BandwidthDescription of VA6822 Application Diagram Installing Your Interface Operation Accessories Troubleshooting Guide Frequently Asked QuestionsSync Contact Information Limited WarrantyAltinex Policy Return Policy

VA6822 specifications

The Altinex VA6822 is a versatile and innovative solution designed to meet the evolving needs of modern presentation environments. As a part of Altinex's diverse range of AV products, the VA6822 is specifically engineered to facilitate seamless integration of various audio-visual devices, making it an ideal choice for conference rooms, classrooms, and other collaborative spaces.

One of the primary features of the VA6822 is its ability to support multiple video formats, including HDMI, DisplayPort, and VGA. This flexibility allows users to connect various devices from laptops to projectors, ensuring compatibility with a wide array of equipment. Enhanced with automatic input detection, the VA6822 intelligently identifies the connected source, providing users with a hassle-free experience without the need for manual adjustments.

The VA6822 also boasts a compact and elegant design, which can easily blend into any environment without being obtrusive. Its robust construction ensures durability while maintaining a lightweight profile, making it easy to install in both new and existing setups. The device is engineered for efficiency, with low power consumption that meets the demands of eco-conscious users.

An important technological highlight of the VA6822 is its advanced video scaling capabilities. With the ability to output high-resolution video at up to 4K, users can experience crystal-clear images and sharp graphics. This feature is particularly beneficial in professional settings, where detail is crucial for effective communication and presentations.

In addition to its video capabilities, the VA6822 includes audio routing features that enhance sound clarity. It supports both analog and digital audio formats, allowing for a seamless audio experience across different devices. When paired with compatible audio systems, users will appreciate the high-quality sound that this unit can deliver.

Furthermore, the VA6822 offers intuitive control options. Users have the ability to manage the device through various methods, including front panel buttons, remote control, or even control via RS-232 for integration with third-party control systems. This level of control simplifies operation, making it accessible for users of all technical skill levels.

In summary, the Altinex VA6822 is an advanced AV solution featuring multiple input formats, superb video scaling capabilities, and versatile audio routing options. Its user-friendly design and flexible integration make it an invaluable asset for any presentation environment, helping to enhance collaboration and communication in today’s fast-paced world.
Top Page Image Contents