Vivotek IP7142 manual PPPoE Point-to-point over Ethernet

Page 29

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

PPPoE (Point-to-point over Ethernet)

Select this option to conﬁgure your Network Camera to make it accessible from anywhere as long as there is an Internet connection. Note that to utilize this feature, it requires an account provided by your ISP.

Follow the steps below to acquire your Network Camera’s public IP address.

1.Set up the Network Camera in a LAN.

2.Go to Conﬁguration > Application > Server Settings (please refer to Server Settings on page 52) to add a new server -- email or FTP server.

3.Go to Conﬁguration > Application > Media Settings (please refer to Media Settings on page 50). Select System log so that you will receive a list of system log in TXT ﬁle format which contains the Network Camera’s public IP address in your email or on the FTP server.

4.Go to Conﬁguration > Network > Network Type. Select PPPoE and enter the user name and password provided by your ISP. Click Save to take effect.

5.The Network Camera starts to reboot.

6.Disconnect the power source of the Network Camera; remove it from the LAN environment to the Internet.

NOTE

►If the default ports are already used by other device connecting to the same router, the Network Camera will select other ports for the Network Camera.

►If UPnPTM is not supported by your router, you will see the following message.

►Steps to enable UPnPTM user interface on your computer:

Note that you must log on to the computer as a system administrator to install the UPnPTM components.

1.Go to Start, click Control Panel, and then click Add or Remove Programs.

User's Manual - 29

Image 29

Contents Page Table of Contents Read before use Package contentsPhysical description ConnectorsDI/DO Diagram Hardware Reset Hardware installationWall mount Ceiling mount Network deployment Ethernet switchInternet connection with static IP Set up the Network Camera through Power over Ethernet PoE Software installation Using web browsers Accessing the Network CameraPage Using Rtsp players Using 3GPP-compatible mobile devices Using Vivotek recording software Main Live Video Window Video title itle and ti e Client Settings MP4 Saving Options System Time SystemSystem DI and do Security Root PasswordAdd User Manage UserCreate and Install Certiﬁcate Enable HttpsTo create a self-signed certificate Certificate Information Network Type NetworkPPPoE Point-to-point over Ethernet Page Http Two way audio HttpsFTP Rtsp Streaming Page Ddns Ddns Dynamic domain name serviceCustomSafe100 Delete allowed list / Delete denied list Access listAllowed list / Denied list Audio and video Video settingsImage Settings Privacy mask Page Page Audio settings Motion detection To enable motion detection, follow the steps belowEr enta e Camera control RS485 SettingsCustom Command Preset PositionNetwork Camera Application Media SettingsNaps ot Server Settings Page Page Event Settings Page Recording Recording SettingsPage Current Log System logRemote Log View parameters Restore MaintenanceReboot Upload / Export Daylight Saving Time Conﬁguration File CalibrateUpgrade Firmware Rti Er d Style convention URL Commands of the Network CameraOverview Security level General CGI URL syntax and parametersGet server parameter values Method GET/POSTSet server parameter values Page Available parameters on the server Timezoneindex 489 ~ Group doi0~ndo-1 Group dii0~ndi-1Subgroup of network http Group securitySubgroup of network pppoe Subgroup of network httpsSubgroup of network rtsp Group ipfilter Page Page Adjust saturation of image according to mode settings Group upnpportforwarding Group upnppresentation= Logalert = Logcrit Group uarti0~n-1 n is uart port count EvenGroup capability Group eventi0~2 Group serveri0~4 Group recordingi0~1 Group mediai0~4To enable or disable this recoding Query status of the digital input Drive the digital outputCapture single snapshot Query status of the digital outputAccount management System logs Upgrade ﬁrmwareSystem Information Method PostMethod GET/POST IP ﬁlteringSenddata Get SDP of StreamingsOpen the network streamings Page Lens Technical SpeciﬁcationsTechnology License Notice Electromagnetic Compatibility EMC