Veo Pan and Tilt manual Smtp server name

Page 43

Network Camera User’s Guide

SMTP: Setup Mail configuration

When alarm was enabled, user can setup the mail to send the captured images to the pre-set mail address.

You may setup SMTP mail parameters for future event-message receiving such as motion detected or sensor activated.

SMTP server name:

Type the SMTP server name up to 64 characters, or the IP address of the SMTP server.

User name:

Type the user name for the SMTP server.

Password:

Type the password for the SMTP server.

43/95

Image 43

Contents Pan and Tilt Network Camera PT IP Cam / IR IP Cam / Video Server Series Declaration of Conformity Table of Contents Appendix C Troubleshooting & Frequently Asked Questions Introduction OverviewSurveillance Minimum System RequirementPackage Contents Screws are used to fix Network Camera 10/95 Connections DC Power and Video Output CableLAN Socket Microphone Alarm I/O ConnectorFactory Default Reset CF Card SocketPlug an Ethernet cable into Network Camera Fix the Network Camera to CeilingConnect the external power supply to Network Camera Before Operation Logging in to HomepageInstall the Network Camera with an Adsl Router First time uses the Network Camera 18/95 19/95 20/95 Logging in as an ordinary User Operating the Network Camera Control Panel During preset mode, click the number and a dialogue box for Advanced Function Area Remote camera control Default frame rateSystem ID Camera Name27/95 Image Size Camera PTImage Quality Audio Saturation, Sharpness, Contrast, HueCamera Tour Reset to Default Dhcp IP Finder Http Port33/95 PPPoE 35/95 36/95 37/95 38/95 Function Notification Application Remote path PasswordFTP server name User nameDate/Time Image file nameSuffix NoneSmtp server name Receiver’s e-mail address Sender’s e-mail addressSubject Image Memory Capacity Warning Memory ContentFile Name OverwriteDuration Alarm 2 Setup Alarm Output 2 action 49/95 50/95 Change the time manually Synchronize the time with PC’s timeGet Time from a NTP server 53/95 Firmware upgrade 55/95 56/95 57/95 58/95 Trigger Capture RightMouseButton of ActiveX Control View View Menu63/95 URL Split Rotate Resolution Quality Image Recording…- Save as Jpeg69/95 Save as AVI Image Recording…- Save as AVI71/95 72/95 73/95 Save Current Picture As … Network Camera User’s Guide 75/95 Restore the Network Camera Appendix a Restore Factory Default SettingsInterfacing to the External I/O Appendix B Alarm I/O ConnectorPin Function Explanation of External I/O Circuit Diagram Example Network Camera User’s Guide 79/95 Features Appendix C Troubleshooting Frequently Asked QuestionsAccess Network Camera LAN Video Quality of Network Camera Camera ControlMiscellaneous Appendix D Ping IP Address Appendix E Bandwidth Estimation Image Resolution Average range of Data SizesCodec JPEG, 3 levels Appendix F SpecificationsCompatibility Firmware UpgradeFrame Rate Audio StreamingAppendix G Time Zone Table Network Camera User’s Guide 90/95 Preface Appendix H Ddns ApplicationApplication Steps-DDNS & Domain Name Page Page Setup the Ddns and PPPoE