Veo Pan and Tilt manual Image Recording…- Save as AVI

Page 70

Network Camera User’s Guide

After “Stop Image Recording”, list the files, these files are named as file_name_prefixed_yyyy_mm_dd_hh_mm_ss_ms.jpg

“Image Recording…-> Save as AVI”

1.Select “Image Recording…”

2.The “Image Recording” pop-up window displays, select

3.“Save as AVI”

4.Input the ”Avi Frame” and “Max Jpeg Num” on each AVI file, until the “Stop Image Recording” is selected. “Avi Frame” is the frame rate setting of the recorded AVI file.

5.For each AVI file, the maximum saved images in each file are specified in “Max Jpeg Num”, once the saves image on each AVI file are reached by this number, then a new AVI file will created to save the following images, until the “Stop Image Recording” is selected.

6.Select “SaveAs”, the pop-up window to select the save path and file name prefix, select “Save” to continue.

70/95

Image 70

Contents Pan and Tilt Network Camera PT IP Cam / IR IP Cam / Video Server Series Declaration of Conformity Table of Contents Appendix C Troubleshooting & Frequently Asked Questions Overview IntroductionMinimum System Requirement SurveillancePackage Contents Screws are used to fix Network Camera 10/95 Connections DC Power and Video Output CableLAN Socket CF Card Socket Alarm I/O ConnectorFactory Default Reset MicrophoneFix the Network Camera to Ceiling Plug an Ethernet cable into Network CameraConnect the external power supply to Network Camera Logging in to Homepage Before OperationInstall the Network Camera with an Adsl Router First time uses the Network Camera 18/95 19/95 20/95 Logging in as an ordinary User Operating the Network Camera Control Panel During preset mode, click the number and a dialogue box for Advanced Function Area Camera Name Default frame rateSystem ID Remote camera control27/95 Image Size Camera PTImage Quality Audio Saturation, Sharpness, Contrast, HueCamera Tour Reset to Default Dhcp Http Port IP Finder33/95 PPPoE 35/95 36/95 37/95 38/95 Function Notification Application User name PasswordFTP server name Remote pathNone Image file nameSuffix Date/TimeSmtp server name Receiver’s e-mail address Sender’s e-mail addressSubject Image Memory Overwrite Memory ContentFile Name Capacity WarningDuration Alarm 2 Setup Alarm Output 2 action 49/95 50/95 Synchronize the time with PC’s time Change the time manuallyGet Time from a NTP server 53/95 Firmware upgrade 55/95 56/95 57/95 58/95 Trigger Capture RightMouseButton of ActiveX Control View Menu View63/95 URL Split Rotate Resolution Image Recording…- Save as Jpeg Quality69/95 Image Recording…- Save as AVI Save as AVI71/95 72/95 73/95 Save Current Picture As … Network Camera User’s Guide 75/95 Appendix a Restore Factory Default Settings Restore the Network CameraInterfacing to the External I/O Appendix B Alarm I/O ConnectorPin Function Explanation of External I/O Circuit Diagram Example Network Camera User’s Guide 79/95 Appendix C Troubleshooting Frequently Asked Questions FeaturesAccess Network Camera LAN Camera Control Video Quality of Network CameraMiscellaneous Appendix D Ping IP Address Image Resolution Average range of Data Sizes Appendix E Bandwidth EstimationAppendix F Specifications Codec JPEG, 3 levelsAudio Streaming Firmware UpgradeFrame Rate CompatibilityAppendix G Time Zone Table Network Camera User’s Guide 90/95 Appendix H Ddns Application PrefaceApplication Steps-DDNS & Domain Name Page Page Setup the Ddns and PPPoE