EL-Skyport Modules
• Universal Receiver for all makes of Flash having a SYNC socket, conforming to Sync norms!
EL-Skyport Transceiver RX
•This Transceiver is only for Elinchrom RX units. The module operates all RX features with the
•To operate RX flash units via computer the USB module should be used together with the
Universal Speed | Transceiver RX | USB RX Speed |
& Universal |
| & USB RX |
Troubleshooting
Should an error occur, first check the following points:
Having this problem? | Check the following points: |
|
|
No Flash unit can be triggered | Check if the Transmitter is switched ON |
with the Transmitter | Check battery polarity |
| Check if the Receiver module is connected correctly to the unit |
| Check if the frequency selector switch is set to the same channel |
| Check if Transmitter is in the same trigger mode Speed or Standard. |
|
|
Some units do not fire when trig- | Reduce distance to any “not working” unit. |
gered with the Transmitter | Check if Transmitter is in the same trigger mode Speed / Standard. |
|
|
TEST flash works, but the camera | Check |
will not trigger Flash unit |
|
|
|
Limited Distance range | Reposition the unit |
| Increase the distance to walls and ceilings |
|
|
CE Statements
This device has been tested and found to comply with the requirements set
up in the council directive on the approximation of the law of member states relating to EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC and R&TTE Directive 99/5/EC
19
