Operating instructions :
2.4 GHz digital wireless Flash Trigger Transmitter
Features
•SLR Camera Sync speeds: SPEED mode up to 1/250 s, STANDARD mode 1/160 - 1/200 s.
•4 frequency channels.
•40 Bit security encryption.
•Up to 50 m range indoors for standard mode and up to 30 m in speed mode.
•Up to 80 m range outdoors for standard mode and up to 40 m in speed mode.
•Battery life up to 6 Months - over 30’000 flashes.
•Test trigger button and feature button.
•Integrated
•Two flash modes, standard and speed.
•Standard mode full compatible with previous
•Status LED for
•New extra features; configure
•The SPEED function is available for Ranger Quadra AS, BXRi 250 / 500 and
You will appreciate the convenience of this new easy to use and powerful wireless device.
Note: Shutter speed and distance range is influenced by interference from other 2.4 GHz electronic equipment. and reflections of ceilings, walls, floors, furniture, metall, trees and humidiy in woods etc.
For best performance the Transmitter and Receiver should have direct sight, without any walls or objects in between.
Battery Installation
1.Pull the battery drawer out carefully
2.Place the Lithium battery, see Fig. 1 for polarity
3.Close the battery drawer
!CAUTION:
•Ensure correct polarity / minus pole on top
•Use Lithium Battery only CR2430 3.0V 19372
•Remove battery if the
•Never
•Avoid direct sunlight or temperatures above 45°C. The battery may explode!
Hot-shoe Connector
The new
Operating Instructions
Fig. 1 | Battery (19372) | |
|
| Minus pole on top |
Battery drawer |
| |
|
|
|
16
