Elinchrom 4 IT Programmable features - Reset, How to „Reset“ the D-Liteit, Modelling lamp modes

Programmable features - Reset English

How to „Reset“ the D-Lite it

In case you need to „RESET“ the D-Lite it to the manufacturer settings please follow the steps below:

1.Switch the unit “off“

2.Press both flash power up / down buttons (10) at the same time and switch the unit on

3.The Digital LED multi display (6) flashes in fast mode

4.Do not continue to press the buttons, the resetting procedure is completed

Modelling lamp features & setup

Modelling lamps and fuses for 110 V & 230 V

Unit	Modelling lamp 110V	Modelling lamp 230V	Socket	Fuse
D-Lite 2 it	100W / 23006	100W / 23002	E27	2.5AF / 19035
D-Lite 4 it	100W / 23006	100W / 23002	E27	2.5AF / 19035

* Do not use energy saving lamps

Modelling lamp modes

>Setting: • Press “Modelling” button to set Modelling lamp ON to proportional mode, max. mode, min. mode, or OFF

•Press “Modelling” up or down button to set Modelling lamp to free mode, press “Free/Prop” to switch Modelling lamp OFF.

>LED Indication: • LED is on: only in proportional mode.

•LED is off: in min. / max. / off mode.

!• Please use only original ELINCHROM modelling lamps with a maximum power of 100W ( effective 150W).

8