Rose electronic QuadraVista manual Computer / Reset PS/2, Computer / Change EDID/DDC

Computer / Reset PS/2

Select Reset PS/2 when the keyboard or mouse have been disconnected or get out of sync.

Use the arrow keys or the “+” and “-“ keys to select the channel to reset and press enter / select.

Figure 32. Computer / Reset PS/2

Computer / Change EDID/DDC

	Select Change EDID / DDC to add two
	selectable video modes to the list of video
	modes available at each of the four video
	ports.
	Use the left, right arrow keys (			) to
	select the first video mode to add. Once
	selected, use the up, down arrow keys
	(	) to select the second video mode to
	add. Use the left, right arrow keys (				)
	to select the second video mode to add.
	When both video modes have been
	selected, use the up, down arrow keys
	(	) to select signal and the left, right
	arrow keys (		) to select analog or
	digital.
	With all entries completed, select “WRITE”
Figure 33. Computer / Change EDID/DDC	and press ENTER / SELECT and the
	window shown on the right in Figure 34
	will open.
	(Procedure continued on next page)

34 QUADRAVISTA INSTALLATION AND OPERATIONS MANUAL