Rose electronic QuadraVista manual DCP Synchronizing Multiple Units

Execute the Serial Communication software and the window shown below will display.

Click on the ICON to connect and display the OSD on the remote computer

Remotely navigate within the OSD menu system from the remote computer the same way as you would using the local console. All OSD menus can be accessed using the arrow keys and the Enter / Select key.

DCP Synchronizing Multiple Units

In systems that use multiple QuadraVista’s, the display mode can be synchronized so all units are the same display mode. To accomplish this, first display the OSD and navigate to the “Control” section (System, Control). Use the up/down arrow keys to select “Synchronization”, then exit the OSD.

Each time you restart a V-Switch quad set to synchronization, it will send all its settings to the next connected device. This process also takes place after activating Synchronization in the OSD menu.

QUADRAVISTA INSTALLATION AND OPERATIONS MANUAL 39