Elinchrom 2 IT Frequency Channel, EL-SkyportSync Speed & Standard Mode, Select “Speed” sync mode

Fig. 2

Status LED

Four Frequency
channel selectors	Flash Test

Frequency Channel

Note:

Transmitter and the corresponding Transceiver RX the Universal Receiver or the EL units with

integrated EL-Skyport Receiver must have the same frequency channel settings!

Frequency	Slide Button configuration		Frequency
Channel	1	2	/ Mhz
1 (default)	Off	Off	2456
2	On	Off	2458
3	Off	On	2460
4	On	On	2462

EL-Skyport Sync Speed & Standard Mode

The SPEED function is available for Ranger Quadra AS, BXRi 250 / 500 und D-Lite it and all other units, when used with the EL-Skyport Universal Speed.

Select “Speed” sync mode

Synchronises SLR cameras up to 1/250 s, or compact digital cameras up to 1/2850 s

-Press test push button one time to switch module on.

-Press test push button for minimum 5 seconds until the STATUS LED flashes two times.

-Release test push button.

-Now the EL-Skyport Transmitter Eco works in “SPEED” mode (r.2 mode).

Select “Standard” triggering mode

Synchronises SLR cameras up to 1/200 s, or compact digital cameras up to 1/1600 s

-Press test push button one time to switch module on..

-Press test push button for minimum 5 seconds until the STATUS LED flashes one time.

-Release test push button.

-Now the EL-Skyport Eco works in “STANDARD” mode.

EL-Skyport Module Configuration:

Only possible with EL-Skyport PC / MAC software v3.0 and higher.

-Power-Save Timer, individual programmable or disabled.

-Trigger delay is programmable from 250 microsecondes (1/4000 s) up to 15 s.

-Download the FREE EL-Skyport Software 3.0 from www.elinchrom.com

17