Vivotek IP7132 manual Motion detection

Page 41

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Motion detection

“Enable motion detection” Check this option to turn on motion detection.

Click on this button to add a new window. At most three windows can exist simultaneously. Use the mouse to click, hold, and drag the window frame to resize or the title bar to move. Clicking on the ‘x’ at the upper right-hand corner of the window to delete the window. Remember to save in order to validate the changes.

Click on this button to save the related window settings. A graphic bar will rise or fall depending on the image variation. A green bar means the image variation is under monitoring level and a red bar means the image variation is over monitoring level. When the bar goes red, the detected window will also be outlined in red. Going back to the homepage, the monitored window is hidden but the red frame shows when motion is detected.

"Window Name" The text will show at the top of the window.

“Sensitivity” This sets the endurable difference between two sequential images. “Percentage” This sets the space ratio of moving objects in the monitoring window. Higher sensitivity and small percentage will allow easier motion detection.

The following figure shows the screen when is clicked. The monitoring window has been outlined in red and the graphic bar goes red since the goldfish is moving.

User's Manual - 40

Image 41
Contents IP Surveillance Technical@vivotek.com Before You Use This Product Table of Contents FTP 886-2-82455282 886-2-82455532 Package Contents Hardware installation InstallationSoftware installation Add Password to prevent Unauthorized Access Initial Access to the Network CameraCheck Network Settings Authentication How to UseInstalling plug-in Main Screen with Camera View Primary user’s capabilitySnapshot Digital ZoomClient settings Page Digital output Fine-tuning for Best Performance Administrator’s capabilityFor Viewing by Mobile Phone Somewhere Between Real-time and Clear Images Opening accounts for new users Protect Network Camera by passwordsBuild a security application Software revision upgrade Definitions in Configuration Page System parameters Security settings Network type Network settingsLAN & PPPoE Get IP address automatically & Use fixed IP addressRtsp Streaming HttpUrl http//Network Camera/setup/network.html Wlan Configuration Tkip AES Page Ddns Access List Audio and Video Video SettingsGeneral Video orientationAudio settings Image Settings FTP Email & FTPUrl http//Network Camera/setup/mailftp.html Motion detection Application Application settingsSnapshot file name prefix Weekly scheduleDigital input Send out the snapshot while motion detectionMethod for sending snapshot Sequential operationPage Video clip file name prefix Video clipVideo clip max file size Send out the video clip while motion detectionSequential operation Page Trigger digital output while motion detection Page System log Viewing system parameters Maintenance Status LED TroubleshootingReset and restore Method GET/POST URL commands of the Network CameraGet server parameter values Parameter pair Set server parameter valuesReturn Skip to invoke default server WirelessNetwork CameraAvailable parameters on the server Yyyy/mm/ddBlank Group Security255.255.255.0 Blank192.168.0.99 Smtp2 Domain Name Secondary Smtp server Address String 5558 5545556 Live.sdp176x144 for mobile 256640x480 For ComputerAAC4 for computer For 60Hz only12200 Gamr for mobile128000 Enable motion window #1 Script.vssx 514 Application page CGI commandIP address Syntax For videoclip Account management Capture single snapshotMaxsize PrefixappindexPrivilege=conf System logsUpgrade firmware Configuration filePost data System CD. Technical specificationsTechnology License Notice Liability Electromagnetic Compatibility EMC