Vivotek IP7132 URL commands of the Network Camera, Get server parameter values, Method GET/POST

Page 55

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

RESTORE:

1.Press on the button continuously.

2.Wait for self-diagnostic to run twice.

3.Free the button as soon as the second self-diagnostic starts.

Restoring the factory defaults

will erase any previous settings. Reset or restore the system after power on.

B. URL commands of the Network Camera

For some customers who already have their own web site or web control application, the Network Camera can be easily integrated through convenient URLs. This section lists the commands in URL format corresponding to the basic functions of the erase Network Camera.

Get server parameter values

Note: This request require administrator access

Method: GET/POST

Syntax:

http://<servername>/cgi-bin/admin/getparam.cgi?[<parameter>] [&<parameter>…]

where the <parameter> should be <group>[_<name>] or <group>[.<name>] If you do not specify the any parameters, all the parameters on the server will be returned. If you specify only <group>, the parameters of related group will be returned.

- 54 -

www.vivotek.com

User's Manual - 54

Image 55

Contents IP Surveillance Technical@vivotek.com Before You Use This Product Table of Contents FTP 886-2-82455282 886-2-82455532 Package Contents Hardware installation InstallationSoftware installation Check Network Settings Initial Access to the Network CameraAdd Password to prevent Unauthorized Access Authentication How to UseInstalling plug-in Main Screen with Camera View Primary user’s capabilitySnapshot Digital ZoomClient settings Page Digital output Fine-tuning for Best Performance Administrator’s capabilityFor Viewing by Mobile Phone Somewhere Between Real-time and Clear Images Opening accounts for new users Protect Network Camera by passwordsBuild a security application Software revision upgrade Definitions in Configuration Page System parameters Security settings Get IP address automatically & Use fixed IP address Network settingsNetwork type LAN & PPPoERtsp Streaming HttpUrl http//Network Camera/setup/network.html Wlan Configuration Tkip AES Page Ddns Access List Video orientation Video SettingsAudio and Video GeneralAudio settings Image Settings FTP Email & FTPUrl http//Network Camera/setup/mailftp.html Motion detection Application Application settingsSend out the snapshot while motion detection Weekly scheduleSnapshot file name prefix Digital inputMethod for sending snapshot Sequential operationPage Send out the video clip while motion detection Video clipVideo clip file name prefix Video clip max file sizeSequential operation Page Trigger digital output while motion detection Page System log Viewing system parameters Maintenance Reset and restore TroubleshootingStatus LED Get server parameter values URL commands of the Network CameraMethod GET/POST Parameter pair Set server parameter valuesReturn Yyyy/mm/dd WirelessNetwork CameraSkip to invoke default server Available parameters on the serverBlank Group Security192.168.0.99 Blank255.255.255.0 Smtp2 Domain Name Secondary Smtp server Address String Live.sdp 5545558 5556Computer 256176x144 for mobile 640x480 ForAAC4 for computer For 60Hz only128000 Gamr for mobile12200 Enable motion window #1 Script.vssx IP address Application page CGI command514 Syntax For videoclip Account management Capture single snapshotMaxsize PrefixappindexPrivilege=conf System logsUpgrade firmware Configuration filePost data System CD. Technical specificationsTechnology License Notice Liability Electromagnetic Compatibility EMC