VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Installation
In this manual, "User" refers to whoever has access to the Network Camera, and "Administrator" refers to the person who can configure the Network Camera and grant user access to the camera.
Hardware installation
Please verify that your product package contains all the accessories listed in the foregoing Package Contents. Depending on the user’s application, an Ethernet cable may be needed. The Ethernet cable should meet the specs of UTP Category 5 and not exceed 100 meters in length.
Connect the power adapter jack to the Network Camera before plugging in to the power socket. This will reduce the risk of accidental electric shock.
Upon powering up, the front blue LED will become lighted first and then the device will go | |
Status LED Color | Description |
Blinking red | booting |
Power is being supplied to the camera. | |
Solid green | The camera is booting up. |
Solid green with blinking red in between | The camera is trying to obtain an IP address. |
Solid green and red | An IP address is successfully assigned to the camera. |
Solid red with blinking green in between | The camera is working. |
Blinking red and green | During firmware upgrading |
will flash every second as heartbeat to indicate alive.
To install in Ethernet
Make sure the Ethernet is firmly connected to a switch hub. After attaching the
EthernetTo installcableinplugEthernetin power adapter. When the red LED is lighted and the green MakeLED blinkssure theeveryEthernetotherissecondfirmly connectedin between,to aindicatingswitch hubthe. Aftercamerattachingis working,the Ethernetplease cablego toplugnextinparagraphthe power“Softwareadapter. installation”If he LED .turnsIf theoutEthernetto be steadyis not available,blue, go toNetworknext
paragraphCamera will“Softwareswitch toinstallation”wireless LAN. Ifmodethe Ethernet. is not available, Network Camera will
- 7 -
www.vivotek.com
- User's Manual