Vivotek IP7131 manual Return

[nosync=<value>&]<parameter>=<value> [&<parameter>=<value>…][&return=<return page>]

parameter	value	description
<group>_<name>.	value to assigned	Assign	<value>	to	the	parameter
		<group>_<name>..
return	<return page>	Redirect to the page <return page> after the
		parameter is assigned. The <return page> can be a
		full URL path or relative path according the the current
		path. If you omit this parameter, it will redirect to an
		empty page.
		(note: The return page can be a general HTML
		file(.htm, .html) or a Vivotek server script executable
		(.vspx) file. It can not be a CGI command. It can not
		have any extra parameters. This parameter must be
		put at end of parameter list)
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: <length>\r\n
\r\n
<parameter pair>
where <parameter pair> is
<parameter>=<value>\r\n
[<parameter pair>]

Only the parameters that you set and readable will be returned.

Example: Set the IP address of server to 192.168.0.123

- 53 -

www.vivotek.com