Vivotek IP7131 URL commands of the Network Camera, Get server parameter values, Method GET/POST

1.Press on the button continuously.

2.Wait for self-diagnostic to run twice.

3.Free the button as soon as the second self-diagnostic starts.

Restoring the factory defaults

will erase any previous settings. Reset or restore the system after power on.

B. URL commands of the Network Camera

For some customers who already have their own web site or web control application, the Network Camera can be easily integrated through convenient URLs. This section lists the commands in URL format corresponding to the basic functions of the erase Network Camera.

Get server parameter values

Note: This request require administrator access

Method: GET/POST

Syntax:

http://<servername>/cgi-bin/admin/getparam.cgi?[<parameter>] [&<parameter>…]

where the <parameter> should be <group>[_<name>] or <group>[.<name>] If you do not specify the any parameters, all the parameters on the server will be returned. If you specify only <group>, the parameters of related group will be returned.

When query parameter values, the current parameter value are returned.

- 51 -

www.vivotek.com