1Loading Film
2Taking a Photo
a |
aPull up the flash unit and snap it into place.
a | 4 ft – | 2 – 4 ft |
| 1.2m – | .6 – 1.2m |
4 ft –
1.2m – 
b Open the film door.
b
aPosition your subject(s)
b Hold the camera still and |
press the shutter button. |
c |
cInsert the film pack as shown. Hold the film pack by the edges. Push the film pack in until a "click" is heard.
b |
c |
c The photo automatically |
ejects. |
d Close the film door. d 
3Lighten/DarkenControl
Use this feature to retake a photo that was too light or too dark. Always return the control to the normal position after using.
e |
eThe camera ejects the paper film cover.
To lighten a photo that is too dark, slide the lighten/ darken control to the right. Retake the photo.
10 | f |
f |
|
Check the picture counter on the back of the camera. The number inside the window shows you how many photos are left in a film pack.
A new pack of film contains 10 photos.
To darken a photo that is too light, slide the lighten/ darken control to the left. Retake the photo.