10.Attach the custom cover to the cartridge bay. Be careful not to pinch the tubes when closing the cover.
11.Obtain the long tube holder and remove the tabs from the back exposing the adhesive. Place the tube holder in the middle of the gray bar and attach it to the printer.
12.Slide tubing into the holder for placement. Leave enough slack so that the cartridge bay can easily slide from one side of the printer to the other without creating tension on the tubes.
13.Obtain the short tube holder and remove the tabs from the back exposing the adhesive. Attach it to the right hand side of the printer where the tubes hang down to meet the Quick Connect II™ ink box. Slide tubes into the holder for placement.