Epson R1800, R800 manual ƒ Do not raise the ink box higher than the printer

10.Obtain the short tube holder and remove the tabs from the back exposing the adhesive. Attach it to the left hand side of the printer where the tubes hang down to meet the Quick Connect II box. Slide the tubes into the holder for placement.

11.Press the ink button to move the print head back to the ink cartridge parked position.

Congratulations! You’ve successfully installed an R800

Quick Connect II ink system and printer.

ƒYou may want to remove the printer lid or leave it open at all times.

ƒYou may have a little air in your lines, but this will clear after a few prints.

ƒIf you are going to leave your system without using it for several days, you should clamp your lines with the tube clamps.

ƒDo not raise the ink box higher than the printer.