Epson R1800, R800 manual VI. Adding Swatches to your Application Palette

the color matrix, find a color that closely resembles the color that you are adding to the custom palette. At the bottom-right of the color matrix window are the RGB values. Simply click ‘OK’ and the RGB Input Color values will be automatically entered. Please take note of these RGB values for later use in your design applications.

ƒClick the Add Color button. A window will pop up asking you whether you want to add the color to the palette for all substrates or just the current substrate. Click ‘YES’ here unless you have the same custom color saved on palettes for other substrates. Another window will then ask you if you want to save the custom color for all resolutions or just the current one. Click ‘YES’ here unless you have the same custom color saved on palettes for other resolutions.

ƒLastly, click the Save Palette button. When finished, simply Exit out of the window.

*The ‘Import Palette’ and ‘Export Palette’ buttons are convenient to have in the event you need to transfer palettes to and from different computers.

VI. Adding Swatches to your Application Palette:

It is possible to add your custom color(s) swatch to an application palette as well. You will need to take note of the Input Color RGB value that you assigned in the previous step in order to create the new swatch. Refer to your specific design application software’s manual for instructions on this.