IMPORTANT – READ CAREFULLY:
This Process License Agreement (“PLA”) is a legal agreement between you and Sawgrass Technologies, Inc. (“Sawgrass”). By installing the SubliJet IQä ink in your printer, or otherwise using the Sawgrass SubliJet IQä ink, you agree to be bound by the terms of this PLA. If you do not agree to the terms of this PLA, Sawgrass is unwilling to license the process of using the SubliJet IQä ink to you. In such event, you may not use the SubliJet IQäink, and you should promptly contact your supplier for instructions on return of the unopened package.
The process of using the SubliJet IQä ink is protected by U.S. and foreign patents. Sawgrass will provide a complete list of the relevant patents upon request. The use of the SubliJet IQä ink to practice the patented process is permitted by this license.
GRANT OF LICENSE This PLA grants you the following rights: You may install and use the SubliJet IQä ink packaged herewith in your EPSON printer to practice the printing process described in U.S. Patent No. 5,488,907. The use of any ink, dye or pigment to practice the Sawgrass Process, other than a SubliJet IQä ink purchased from Sawgrass or its authorized distributor accompanied by a PLA, is not a licensed use of the Sawgrass Process. No rights to use the Sawgrass Process, except those specified herein, are granted, and no rights to use any other process, product, software or hardware developed or sold by Sawgrass are granted or implied hereby.
LIMITATIONS ON REVERSE ENGINEERING You agree that you will not attempt to reverse engineer, reproduce or deformulate the SubliJet IQä ink.
PATENTS AND COPYRIGHTS Sawgrass owns multiple U.S. and foreign patents, which apply to the Sawgrass Process and/or the SubliJet IQä ink or its use. All patents in and to the SubliJetÒ ink and the method of using the SubliJet IQä ink are owned by Sawgrass Technologies, Inc. You may not copy the printed materials accompanying the SubliJet IQä ink. All rights not specifically granted under this PLA are reserved by Sawgrass Technologies, Inc.
Made In U.S.A.
CAUTION:
∙For best printing results, use the ink within six months of purchase.
∙Keep out of reach of children.
∙Do not expose ink to temperatures above 100º F or below 40º F.
∙Keep ink out of direct sunshine.
Sawgrass Technologies, Inc. agrees to replace any defective ink within a reasonable time, which shall be Sawgrass’ sole responsibility for errors or defects in these goods.
THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. SAWGRASS SHALL NOT BE LIABLE FOR LOSS OF PROFIT OR OTHER ECONOMIC LOSS, OR FOR INDIRECT, SPECIAL, CONSEQUENTIAL OR OTHER SIMILAR DAMAGES.
SubliJet IQ is a trademark of Sawgrass Technologies, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Sawgrass Technologies, Inc. disclaims any and all rights in those marks.