Canon 580EX II Installing the Batteries, Open the cover, Install the batteries, Close the cover

Page 9

Installing the Batteries

Install four size-AA batteries.

Open the cover.

•Use your thumb to press the battery compartment lock lever, then slide it as shown by the arrow CD to open the cover.

Install the batteries.

•Make sure the + and - battery contacts are properly oriented as shown in the compartment.

Close the cover.

•Close the battery compartment cover and slide it as shown by the arrow.

~When the cover clicks in place, it will be locked.

Recycling Time and Flash Count (with size-AA alkaline batteries)

"on new

•Quick flash enables a flash to be fired before flash-ready (p.1 0).

--• Using size-AA batteries other than the alkaline type may cause improper battery contact due to the irregular shape of the battery contacts.

•If you change the batteries after firing many flashes continuously, be aware that the batteries might be hot.

[i] Use a new set of four batteries of the same brand. When replacing the batteries, replace all four at one time.

Size-AA Ni-MH or lithium batteries can also be used.

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 580EXII Sboexii Thank you for purchasing a Canon product Contents Nomenclature ~y\l~~g/p~~,7i11Uminationl Ir=J -J--~~~~1~~n Aal.aau.aa Getting Started and Basic Operation Install the batteries Installing the BatteriesOpen the cover Close the coverAttach the Speedlite Attaching to the CameraSecure the Speedlite Detach the SpeedliteAbout Auto Power Off \1 Set the power switch to onCheck that the flash is ready About Quick FlashEttl is displayed Press the Mode button so thatFlash Sync Speeds and Apertures Used Using E-TTL II and E-TTL Autoflash in the Shooting Modes BIUsing Flash Select ~ ~ Flash Exposure Compensation l II 111I LIISet the flash exposure compensation amount Press the @ buttonSet the flash exposure bracketing amount Turn the @ dial to set the amountFEB will be set Focus the subject Press the FEL button FEL FE LockIHigh-speed Sync Set the Bounce Direction Catchlight panel will come out at the same time Creating a CatchlightZOO M Setting the Flash Coverage and Using the Wide Panel Using the Wide PanelPress the ZOOM/~ button Auto Zoom for Image Size Figures for increased flash output Flash Output DisplayMetered Manual Flash Exposures Set up an 18% gray cardSet the camera and Speedlite Focus the subjectSet the desired number Calculating the Shutter SpeedPress the @ button to select the item blinks Flash Output Maximum Stroboscopic FlashesPress the ~H / ~ button so that ~ is displayed ~ Second-Curtain Sync ,11111111 11111111 II I IIICustom FunctionFunction Fn Setting Custom Functions 1\\1.\\\.\\~\.1\Change the setting Turn the @ dial to set the Custom Function NoPress the €J button Page External Flash Metering IRlln Set the Speedlite to the cameras aperture setting Speedlite Control with the CamerasMenu Screen Setting Speedlite functionsSpeedlite Custom Functions Clear All Speedlite Custom FunctionsWireless Flash Positioning and Operation Range Multi-Speedlite, Wireless Lighting Configurations Wireless flash with two slave groups p.41Wireless flash with three slave groups p.43 Slave Unit Setting Set it as a slave unit Master Unit SettingSet the master unitsflash mode Fully Automatic Wireless FlashSet the camera-attached 580EX As the master unitSet the camera and shoot Check the flash operationMaster UnitsFlash ON/OFF Setting the Communication Channel Using Fully Automatic Wireless FlashSo that . blinks Set the channel NoSet the wireless mode to Setting the Slave UnitsFlash Ratio with E-TTL Press the ZOOM/~ buttonSet the wireless mode to Setting the Master Unit and ShootingSet the slave Set the flash ratioSet the slave units Wireless Flash with Three Slave GroupsSet the master unit and shoot Follow Setting the Master Unit Shooting on page 42. In stepSetting the Flash Output for Each Slave Press the Mode button soSo that -1·1.- blinks Setting Manual Flash and Stroboscopic Flash with the Slave Manual FlashStroboscopic Flash Reference 8J1I1I/~1I/~ 8 About the AF-Assist Beam About Color Temperature Information TransmissionPower turns off by itself Troubleshooting GuideSpeedlite does not fire Slave unit does not fireFlash range scale bars blink Type SpecificationsWireless Flash Quick Flash Guide No. at ISO 100, in meters/feetFeatures Available with Type-B Cameras Page European Union and EEA only Canon Canon Canon mUfHJ1.lE ~~&~~ ~~~
Related manuals
Manual 58 pages 6.29 Kb

580EX II specifications

The Canon 580EX II is a powerful external flash unit designed for both amateur and professional photographers seeking to enhance their lighting capabilities. As a part of Canon's Speedlite series, the 580EX II offers a range of main features and advanced technologies that make it an essential tool for any photography setup.

One of the most notable features of the Canon 580EX II is its impressive guide number of 58 at ISO 100, which provides strong illumination for both close-up and long-distance subjects. This high guide number allows photographers to achieve effective lighting in various situations, whether shooting indoors or outdoors. The flash head can also tilt up to 90 degrees and rotate 180 degrees in either direction, allowing for versatile bounce and indirect lighting techniques that help produce soft, natural-looking shadows.

The 580EX II is equipped with Canon's E-TTL II (Evaluative Through-The-Lens) flash metering technology. This advanced metering system enables the flash to communicate with the camera to achieve optimal exposure settings automatically. The result is a more consistent and accurate portrayal of subjects in various lighting conditions, reducing the likelihood of overexposed or underexposed shots.

Another key characteristic of the 580EX II is its fast recycle time, which allows photographers to take multiple shots in quick succession without significant delays. This is especially beneficial during dynamic shooting scenarios like events or wildlife photography, where timing is crucial. The flash can operate in both manual mode for full control or in automatic mode for ease of use, catering to different shooting preferences.

The Canon 580EX II is also compatible with a variety of Canon EOS cameras, ensuring seamless integration into existing camera systems. Additionally, it supports wireless flash photography, allowing for creative off-camera flash setups when paired with compatible Canon camera bodies. Photographers can experiment with different lighting angles and configurations to enhance their creative vision.

Durability is an important factor in the design of the 580EX II, featuring a robust construction that can withstand the rigors of professional use. It also includes a dust and moisture-resistant design, providing added protection when shooting in challenging environments.

In summary, the Canon 580EX II stands out as a versatile and powerful flash unit, combining numerous features and advanced technologies that cater to the needs of photographers. Its high guide number, E-TTL II integration, fast recycle time, and durability make it a reliable choice for enhancing any photography experience. Whether used for portraits, events, or creative lighting, the 580EX II is an invaluable asset in the photographer's toolkit.
Top Page Image Contents